639341
15
Zoom out
Zoom in
Previous page
1/52
Next page
If you touch or
while you set the
DURATION, the
appliance switches to
the setting of the END
function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display.
The appliance deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Deactivate the appliance.
7.4 Setting the END
1. Activate the appliance and set an
oven function and temperature.
2. Touch again and again until the
display shows
.
flashes in the display.
3. Use
or to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for two minutes.
symbol
and the time setting flash in the display.
The appliance deactivates.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Deactivate the appliance.
7.5 Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a
programme) and temperature (refer
to "Setting the oven function" and
"Changing the temperature").
2. Set the DURATION (refer to "Setting
the DURATION").
3. Touch again and again until
flashes in the display.
4. Touch
to set the SET+GO
function.
The display shows and with an
indicator. This indicator shows which
clock function is activated.
5.
Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
7.6 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 23 h 59 min). This
function has no effect on the operation
of the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1.
Touch
.
and "00" flash in the display.
2.
Use to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Use or to set the MINUTE
MINDER and to confirm.
4. Touch both and at once to
reset the set time.
5. Touch
or the MINUTE MINDER
starts automatically after five
seconds.
When the set time ends, an acoustic
signal sounds for two minutes and 00:00
and flash in the display.
6. Touch a sensor field or open the
oven door to stop the acoustic
signal.
7.7 Setting the Time delay
function
The DURATION and END can be
used at the same time, if the appliance is
to be switched on and off automatically
later. In this case, first set the DURATION
and then the END function (refer
to "Setting the DURATION" and
"Setting the END" ).
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
with a dot and . The
dot shows which clock
function is on in the Clock /
residual heat display.
ENGLISH 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG BS7314721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG BS7314721 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG BS7314721

AEG BS7314721 User Manual - German - 56 pages

AEG BS7314721 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info