Manual AEG BS2E 7.2 T (page 6 of 95) (English, German, Dutch, French, Italian, Portuguese, Spanish)

463062

Zoom out

Zoom in

1/95

ENGLISH

BS2E 7.2 T, BS2E 9.6 T, BS2E 12 T, BS2E 14.4 T, POWERBASE 60

Switching on: Press on-off switch

Switching off: Release on-off switch

The speed can be infinitely varied by

slowly releasing/pressing the switch

trigger.

For drilling twist the adjustment ring such

that the symbol

faces the marking; the

safety clutch is now locked and the

maximum torque available.

For screwdriving at constant cutting

depth torque speed pre–selection with

torque adjustment ring is possible. For this

turn torque adjustment ring until the

desired torque level faces the marking.

Torque level 1: minimum torque speed for

screwdriving

Torque level 7: maximum torque speed for screwdriving

When often screwing in the “drilling” (

) setting, the motor can overheat. Please

choose a torque which is suited to the working material and size of the screw. By

doing so you can avoid the bit sliding of the screw head and damaging the

screwdriver bit.

Bit storage for compartment screwdriver

bits

Temperatures in excess of 50

C (122

F)reduce the performance of the battery pack.

Avoid extended exposure to heat or sunshine (risk of overheating).

Center punch the point you have marked for drilling.

Always hold sheet metal firmly in a vice.

Lay a block of wood under thin metal to prevent it from distorting.

Use HSS spiral drill bits. (For white cast iron, use drill bits with special tips.)

Before drilling large-diameter holes, first drill a small pilot hole.

Use lubricant:

Steel: Oil

Aluminium: Turpentine, paraffin

Brass, copper, cast iron: no lubricant, but take the drill out of the hole frequently to

cool it off.

Center punch the point you have marked for drilling. To prevent the wood from

splintering when the drill bit tip breaks through, lay a piece of scrap wood underneath

it, or drill from both sides.The maximum drill-diameter can only be reached with a

Forstner–drill bit.

Use screwdriver bits of the appropriate size and shape.

Suitable screws can be driven into softwood without pre-drilling.

Pre-drill into hardwood or for screws of large diameter.

Pre-drill further for countersunk screws.

For woodscrews threaded less than their full length, pre-drill approx. half the length

of the screw.

On-/off switch

Torque

Adjustment

Bit storage

Advice for

operation

Tips on drilling in

metal

Tips on drilling

into wood

Tips for

screw-driving

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BS2E 7.2 T in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BS2E 7.2 T Manual

Product: