463064

AEG BS2E 14.4 T Manual

3
Zoom out
Zoom in
Previous page
1/95
Next page
3
ENGLISH
BS2E 7.2 T, BS2E 9.6 T, BS2E 12 T, BS2E 14.4 T, POWERBASE 60
J Do not try to charge non-chargeable batteries with this charger.
J No metal parts must be allowed to enter the battery section of the charger (short
circuit risk).
J Never break open battery packs and chargers and store only in dry rooms.
Keep dry at all times.
J Please pay attention to the following symbol on the label of the charger:
This tool is only suitable for indoor use. Never expose tool to rain.
J The battery clamps of the charger are fed by the mains supply. Do not touch the
tool with conducting objects.
J Never charge a damaged battery pack. Replace by a new one.
J Before use check machine, cable, and plug for any damages or material fatigue.
Repairs should only be carried out by authorised Service Agents.
Typically the A-weighted sound pressure level of the tool is less than 70 dB (A). The
noise level when working can exceed 85 dB (A). Wear ear protectors!
Typically the hand-arm vibration is below 2.5 m/s
2
.
The battery drill/screwdriver is designed for drilling and screwdriving for independent
use away from mains supply.
The quick charger can charge AEG System Accu 3000 batteries from 7.2 V to 14.4
V.
Do not use this product in another way as stated for normal use.
Connect charger only on single phase AC current and only with mains voltage given
on rating plate. Connection is also possible to sockets without earthwire, as
appliance is double insulated in accordance with DIN 57 700/VDE 0700 or IEC 335.
Radio suppression complies with European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
The contacts of chargers and battery packs must be kept clean.
If the supply cord of this appliance is damaged, it must only be replaced by a repair
shop appopinted by the manufacturer, because special purpose tools are required.
Use only AEG accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our AEG service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the ten–digit
No. as well as the machine type printed on the label and order the drawing at your
local service agents or directly at: Atlas Copco Electric Tools GmbH, Postfach 320,
D–71361 Winnenden.
The range of accessories with part numbers is shown in our catalogue.
Measured sound
value
Measured
vibration value
Use
Mains
connection
POWERBASE 60
Maintenance
Accessories
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG BS2E 14.4 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG BS2E 14.4 T in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info