Manual AEG BS 12XR (page 8 of 35) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

463056

Zoom out

Zoom in

1/35

14 15

BS 12 X-R BS 14 X-R

...........................10 mm ..........................13 mm

...........................30 mm ..........................32 mm

.............................8 mm ..........................10 mm

......................0-380 min

-1

....................0-400 min

-1

....................0-1300 min

-1

..................0-1400 min

-1

...........................16 Nm ...........................18 Nm

...........................35 Nm ...........................40 Nm

......................38/15 Nm ......................40/18 Nm

.............................260 ...............................280

...........................12 V ...........................14,4 V

........................1-10 mm .......................1-10 mm

..........................2,0 kg ............................2,1 kg

...........................69 dB (A) ......................68 dB (A)

...........................80 dB (A) ......................79 dB (A)

.......................< 2,5 m/s

......................< 2,5 m/s

..........................1,5 m/s

.........................1,5 m/s

.......................< 2,5 m/s

......................< 2,5 m/s

..........................1,5 m/s

.........................1,5 m/s

ENGLISH

TECHNICAL DATA

Drilling capacity in steel ...........................................................

Drilling capacity in wood ..........................................................

Wood screws (without pre-drilling) ..........................................

No-load speed 1st gear ...........................................................

No-load speed 2nd gear ..........................................................

Torque

Low torque max.*1 ...............................................................

High torque max.*1 ...............................................................

Static jamming moment 1st gear/2nd gear ..............................

Screwing capacity with one fully charged battery (3.0 Ah) : *2

5x40 Soft wood .....................................................................

Battery voltage.........................................................................

Drill opening range ..................................................................

Weight with battery ..................................................................

Noise/vibration information

Measured values determined according to EN 60 745.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K = 3 dB(A)) .......................................

Sound power level (K = 3 dB(A)) ............................................

Wear ear protectors!

Total vibration values (vector sum in the three axes)

determined according to EN 60745.

Vibration emission value a

Drilling into metal ..................................................................

Uncertainty K= ......................................................................

Screwing ...............................................................................

Uncertainty K= ......................................................................

*1 Measured according to AEG norm N 877318

*2 The values stated are reference values.

Actual values might differ, depending on the material and

quality of the screws.

WARNING! Read all safety warnings and all

instructions, including those given in the accompanying

brochure. Failure to follow the warnings and instructions

may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause hearing

loss.

Hold power tool by insulated gripping surfaces, when

performing an operation where the fastener may

contact hidden wiring. Fasteners contacting a "live" wire

may make exposed metal parts of the power tool "live" and

could give the operator an electric shock.

Sawdust and splinters must not be removed while the

machine is running.

When working in walls ceiling, or oor, take care to avoid

electric cables and gas or waterpipes.

Remove the battery pack before starting any work on the

machine.

Do not dispose of used battery packs in the household

refuse or by burning them. AEG Distributors offer to retrieve

old batteries to protect our environment.

Do not store the battery pack together with metal objects

(short circuit risk).

Use only System GBS chargers for charging System GBS

battery packs. Do not use battery packs from other systems.

Battery acid may leak from damaged batteries under

extreme load or extreme temperatures. In case of contact

with battery acid wash it off immediately with soap and

water. In case of eye contact rinse thoroughly for at least 10

minutes and immediately seek medical attention.

SPECIFIED CONDITIONS OF USE

The battery drill/screwdriver is designed for drilling and

screwdriving for independent use away from mains supply.

Do not use this product in any other way as stated for

normal use.

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained, the vibration emission may differ. This may signicantly increase

the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work patterns.

ENGLISH

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is

in conformity with the following standards or standardized

documents. EN 60745, EN 55014-1, EN 55014-2, in

accordance with the regulations 98/37/EC, 2004/108/EC

Rainer Kumpf

Manager Product Development

Winnenden, 2009-04-20

BATTERIES

New battery packs reach full loading capacity after 4 - 5

chargings and dischargings. Battery packs which have not

been used for some time should be recharged before use.

Temperatures in excess of 50°C (122°F) reduce the

performance of the battery pack. Avoid extended exposure

to heat or sunshine (risk of overheating).

The contacts of chargers and battery packs must be kept

clean.

MAINTENANCE

Use only AEG accessories and spare parts. Should

components need to be replaced which have not been

described, please contact one of our AEG service agents

(see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered.

Please state the Article No. as well as the machine type

printed on the label and order the drawing at your local

service agents or directly at: AEG Elektrowerkzeuge,

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

SYMBOLS

Please read the instructions carefully before

starting the machine.

Remove the battery pack before starting any

work on the machine.

Do not dispose of electric tools together with

household waste material! In observance of

European Directive 2002/96/EC on waste

electrical and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their

life must be collected separately and returned to

an environmentally compatible recycling facility.

BS 12 X-R BS 14 X-R

...........................10 mm ..........................13 mm

...........................30 mm ..........................32 mm

.............................8 mm ..........................10 mm

......................0-380 min

-1

....................0-400 min

-1

....................0-1300 min

-1

..................0-1400 min

-1

...........................16 Nm ...........................18 Nm

...........................35 Nm ...........................40 Nm

......................38/15 Nm ......................40/18 Nm

.............................260 ...............................280

...........................12 V ...........................14,4 V

........................1-10 mm .......................1-10 mm

..........................2.0 kg ............................2.1 kg

...........................69 dB (A) ......................68 dB (A)

...........................80 dB (A) ......................79 dB (A)

.......................< 2.5 m/s

......................< 2.5 m/s

..........................1.5 m/s

.........................1.5 m/s

.......................< 2.5 m/s

......................< 2.5 m/s

..........................1.5 m/s

.........................1.5 m/s

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BS 12XR in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BS 12XR Manual

Product: