Manual AEG BHG 750W (page 12 of 48) (English, German, Dutch, French, Polish)

648323

Zoom out

Zoom in

1/48

Operation - for users and contractors

3. Appliance description

This appliance has been designed as a booster heater

and is particularly suitable for bathrooms, as well as dry-

ing and warming bathrobes and towels. You can place

your towels at various heights.

The appliance heats the room through natural convection

and radiated warmth. The integral room thermostat keeps

the room at the set temperature. For this, it is important

that the appliance's heating output matches the room's

heat demand. This only applies if no towels or bathrobes

are hung on the appliance.

The boost function enables the appliance to be operated

at full heating output without temperature control for a

limited period of 2 hours. You can program the time at

which the appliance starts automatically every day.

The appliance is ready for operation when it has been

xed to the wall and plugged into the mains.

4. Operation

4.1 User interface description

You operate the appliance by means of its user interface.

26_07_80_0050

1 2

5 3

1 ON/OFF indicator

2 Heat indicator

3 Temperature selector

4 "24h auto" setting range

5 Rotary selector

4.2 Switching the appliance on

» Set the mode selector to "ON".

» Set the required room temperature with the temper-

ature selector. You can choose between 10 °C and

30 °C.

The heat indicator lights up when the appliance starts to

heat. The heat indicator goes off when the temperature

set at the temperature selector is reached.

Note

If several appliances are installed in one room, a

different temperature can be set at each one.

Note

To avoid excessive power consumption when win-

dows are open, stop the appliance while venting.

4.3 2 h boost function

Enable

» Switch the appliance on.

» Press the mode selector for about a second.

The ON/OFF indicator and the heat indicator illuminate.

The appliance heats for 2 hours at full output.

At the end of the 2 hours, the appliance returns to stand-

ard operation with the temperature selector. The heat

indicator and ON/OFF indicator extinguish.

Disable

» Press the mode selector for about a second.

The heat indicator and ON/OFF indicator extinguish. The

appliance returns to normal operation controlled by the

temperature selector.

4.4 24 h automatic function

The 24 h automatic function repeats the 2 h boost function

automatically every 24 hours.

Enable

Turn the mode selector fully clockwise to "24 h auto".

The ON/OFF indicator and the heat indicator illuminate.

The appliance heats for 2 hours at full output.

At the end of the 2 hours, the appliance returns to stand-

ard operation with the temperature selector. The heat

indicator and ON/OFF indicator extinguish.

The 2h boost function starts the following day 45 minutes

before the time when the appliance was set to "24h auto".

Example:

You would like your bathroom to be at the required tem-

perature at 07:00 h in the morning.

» On the rst day at 07:00 h in the morning, set the ro-

tary selector to "24h auto".

The appliance immediately starts heating as per the 2 h

boost function. The next day, the 2h boost function auto-

matically starts at 06:15 h in the morning, in order to heat

up the bathroom for 07:00 h.

Interruption

You can interrupt the 2 h boost function at any time with-

out changing the start time.

» Press the mode selector for about a second.

The heat indicator and ON/OFF indicator extinguish. The

appliance returns to normal operation controlled by the

temperature selector.

On the following day the 2 h boost function will resume

from the usual start time.

Disable

» Turn the mode selector fully anti-clockwise to "ON".

The heat indicator and ON/OFF indicator extinguish. The

appliance returns to normal operation controlled by the

temperature selector.

4.5 Childproong

This function prevents the temperature setting from being

changed unintentionally.

If the childproof setting is active, the temperature and

mode selectors are not operational. The ON/OFF indica-

tor ashes if you adjust the mode selector/temperature

selector.

Enable

» Press and hold the mode selector for more than

three seconds.

The ON/OFF indicator ashes consecutively ve times.

This tells you that the childproof setting is active.

You can also use the 2 h boost function as usual when

childproong has been enabled.

Disable

» Press and hold the mode selector for more than

three seconds.

The ON/OFF indicator ashes consecutively ve times.

This tells you that the childproof setting is disabled.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BHG 750W in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 9,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BHG 750W Manual

Product: