696609

AEG BEK63102ZM Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
When the set time ends, an acoustic
signal sounds for 2 minutes. and the
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field to stop the
acoustic signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION.
4. Touch
.
5. Use or to set the hours for
DURATION.
6. Touch
, the appliance switches to
the setting of the END function.
The display shows flashing .
7. Use
or to set the END and
or to confirm. First you set the
minutes and then the hours.
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
and the time setting flash in
the display. The appliance deactivates
automatically.
8. Touch a sensor field to stop the
acoustic signal.
9. Turn off the appliance.
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
with a dot and . The
dot shows which clock
function is on in the Clock /
residual heat display.
7.6 Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a
programme) and temperature.
2. Set the DURATION.
3. Touch again and again until
flashes in the display.
4. Touch to set the SET+GO
function.
The display shows
and with an
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
7.7 Setting the MINUTE
MINDER
1.
Touch .
and "00" flash in the display.
2.
Use
to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Use
or to set the MINUTE
MINDER and
to confirm.
4. Touch
or the MINUTE MINDER
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes and 00:00
and
flash in the display.
5. Touch a sensor field to stop the
acoustic signal.
7.8 COUNT UP TIMER
1. To reset the Count Up Timer press:
again and again until display
shows flashing
.
2. Press and hold: . When the
display shows "00:00" the Count Up
Timer starts to count up again.
8.
AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
There are 20 automatic programmes.
Use an automatic programme or recipe
when you do not have the knowledge or
www.aeg.com12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG BEK63102ZM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG BEK63102ZM in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG BEK63102ZM

AEG BEK63102ZM User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info