558050
12
Zoom out
Zoom in
Previous page
1/40
Next page
SYM-
BOL
FUNCTION DESCRIPTION
TIME OF DAY To examine the time of day. For changing the
time of day refer to 'Setting the time of day'.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You can
use Duration and End at the same time (Time de-
lay), if the appliance is to be activate and deacti-
vate automatically later.
SET+GO To start the appliance with necessary settings
with only one touch of the sensor field, any time
later.
7.1 Count Up Timer
Use the Count Up Timer to monitor how
long the appliance operates. It is on im-
mediately when the appliance starts to
heat.
Reset the Count Up Timer: touch
.
Touch
until the display shows
"00:00" and the Count Up Timer starts
to count up again.
You cannot use the Count Up
Timer when Duration or End is
set.
7.2 Setting the DURATION
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch again and again until the
display shows
. flashes in the
display.
3.
Use or to set the minutes for
DURATION.
4.
Touch to confirm.
5.
Use or to set the hours for
DURATION.
If you touch or while you
set the DURATION, the appli-
ance switches to the setting of
the END function.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the dis-
play. The appliance deactivates.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
7.
Deactivate the appliance.
7.3 Setting the END
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch again and again until the
display shows
. flashes in the
display.
3.
Use or to set the END (first
you set the minutes and then the
hours) and
or to confirm.
4.
When the set time ends, an acoustic
signal sounds for two minutes.
symbol and the time setting flash
in the display. The appliance deacti-
vates.
5.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
6.
Deactivate the appliance.
7.4 Check result (selected
models only)
If you set the END or DURATION func-
tion, two minutes before the end of
cooking an acoustic signal sounds and
the lamp activates. The appliance goes
to the setting of the END or DURATION
function. During these two minutes you
can examine the results of the cooking,
and, if necessary, add the END or DURA-
TION time.
12
www.aeg.com
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG BE7304071M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG BE7304071M in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG BE7304071M

AEG BE7304071M User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info