558049
16
Zoom out
Zoom in
Previous page
1/40
Next page
4.
Touch or to set the core
temperature.
5.
Touch or the settings save auto-
matically after 5 seconds.
Useful information:
You can set the core temperature
only when
flashes. If is in
the display but does not flash before
you set the core temperature, touch
and or to set a new val-
ue.
6.
Set the oven function and, if neces-
sary, the oven temperature.
The display shows the current core
temperature and the temperature
bar, which shows the relation be-
tween the set oven temperature and
the current oven temperature.
Useful information:
The core temperature sensor must
stay in the meat and in the socket
during the cooking.
While the appliance calculates the
approximate duration time, the val-
ue of the Count Up Timer function
shows in the Timer / residual heat
display. When the first calculation
ends, the Timer / residual heat dis-
play shows - and then the approxi-
mate duration of the cooking. The
appliance continues to calculate the
duration during the cooking. The
display updates at intervals with the
new duration value.
7.
When the meat is at the set core
temperature, the core temperature
and
flash. An acoustic signal
sounds for two minutes. Touch a
sensor field to deactivate the acous-
tic signal.
8.
Remove the core temperature sen-
sor from the socket and remove the
meat from the appliance.
WARNING!
Be careful when you remove the
core temperature sensor. It is
hot. There is a risk of burns.
9.
Deactivate the appliance.
When you put the core tempera-
ture sensor into the socket, you
cancel the settings for the clock
functions.
When you cook with the core tempera-
ture sensor, you can change the temper-
ature shown in the Temperature / Time
display. After you put the core tempera-
ture sensor in the socket and set an oven
function and temperature, the display
shows the current core temperature.
Touch
again and again to see
three other temperatures:
The set core temperature
The current oven temperature
The current core temperature.
The set core temperature changes into
the current core temperature and the
current oven temperature changes into
the set oven temperature.
9.2 Inserting the oven accessories
The deep pan and the wire shelf have
side edges. These edges and the shape
of the guide-bars are a special device to
prevent the cookware from slipping.
16
www.aeg.com
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG BE7004031M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG BE7004031M in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG BE7004031M

AEG BE7004031M User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info