Manual AEG BE600R (page 11 of 39) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

463050

Zoom out

Zoom in

1/39

20 21

BE 600 R

...........600 W

...........300 W

......0-2700 min

-1

.........1500 min

-1

.............21 Nm

.............10 mm

.............13 mm

.............30 mm

.......1,0-10 mm

.....1/2"x20

.............43 mm

............1,7 kg

................83 dB (A)

................94 dB (A)

............4,5 m/s

...............3 m/s

MAINTENANCE

The ventilation slots of the machine must be kept clear at all

times.

Use only AEG accessories and AEG spare parts. Should

components need to be replaced which have not been

described, please contact one of our AEG service agents (see

our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered.

Please state the ten-digit No. as well as the machine type

printed on the label and order the drawing at your local

service agents or directly at: AEG Elektrowerkzeuge,

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

SYMBOLS

Please read the instructions

carefully before starting the

machine.

Always disconnect the plug from the socket

before carrying out any work on the machine.

Accessory - Not included in standard

equipment, available as an accessory.

Do not dispose of electric tools together with

household waste material! In observance of

European Directive 2002/96/EC on waste

electrical and electronic equipment and its

implementation in accordance with national

law, electric tools that have reached the end

of their life must be collected separately and

returned to an environmentally compatible

recycling facility.

ENGLISH

TECHNICAL DATA Rotary Drill

Rated input ............................................................................................

Output ....................................................................................................

No-load speed .......................................................................................

Speed under load max. .........................................................................

Static jamming moment*........................................................................

Drilling capacity in steel .........................................................................

Drilling capacity in aluminium ................................................................

Drilling capacity in wood ........................................................................

Drill opening range ................................................................................

Drive shank............................................................................................

Chuck neck diameter .............................................................................

Weight without cable .............................................................................

Noise Information

Measured values determined according to EN 60 745.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K = 3 dB(A)) .....................................................

Sound power level (K = 3 dB(A)) .........................................................

Wear ear protectors!

Vibration Information

Total vibration values (vector sum in the three axes) determined

according to EN 60745.

Vibration emission value a

: ...............................................................

Uncertainty K = ..................................................................................

The data stated above apply for models with 230 - 240 V.

In case of deviating mains voltage, the data stated on the rating plate

are applicable.

* Measured according to AEG norm N 877318

WARNING! Read all safety warnings and all

instructions, including those given in the accompanying

brochure. Failure to follow the warnings and instructions may

result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause hearing

loss.

Use auxiliary handles supplied with the tool. Loss of

control can cause personal injury.

Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

may contact hidden wiring or its own cord. Contact with a

„live“ wire will also make exposed metal parts of the power

tool „live“ and shock the operator.

Appliances used at many different locations including open air

must be connected via a residual current operated device (FI,

RCD, PRCD).

Always wear goggles when using the machine. It is

recommended to wear gloves, sturdy non slipping shoes and

apron.

Sawdust and splinters must not be removed while the

machine is running.

Always disconnect the plug from the socket before carrying

out any work on the machine.

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the machine.

Always lead the cable away behind you.

When working with large drill diameters, the auxiliary handle

must be fastened in a right angle with the main handle (see

illustrations, section „Twisting the handle“).

Do not use diamond core drills on hammer mode.

When working in walls ceiling, or oor, take care to avoid

electric cables and gas or waterpipes.

SPECIFIED CONDITIONS OF USE

The drill can be used for drilling in wood, metal and plastics

and for screwdriving.

Do not use this product in any other way as stated for normal

use.

MAINS CONNECTION

Connect only to single-phase a.c. current and only to the

system voltage indicated on the rating plate. It is also possible

to connect to sockets without an earthing contact as the

design conforms to safety class II.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is in

conformity with the following standards or standardized

documents. EN 60745, EN 55014-1, EN 55014-2, EN 61000-

3-2, EN 61000-3-3, in accordance with the regulations

2006/42/EC, 2004/108/EC

Winnenden, 2010-07-20

Rainer Kumpf

Manager Product Development

Authorized to compile the technical le

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in

EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained, the vibration emission may differ. This may signicantly increase the

exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is

running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work patterns.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG BE600R in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG BE600R Manual

Product: