Manual AEG AXP26U338CW (page 19 of 92) (English, German, Dutch, French)

688858

Zoom out

Zoom in

1/92

19ENGLISH

NOTE:

• Unscrew the drain cap of continuous

drain outlet(Fig.20).

• Connect one end of the garden hose

(sold separately) or drain hose to

the drain outlet then lead the other

end into a drain that is lower than the

unit(Fig.21).

•

the drain cap, if the unit is running in

Cool or Auto mode. When you want

to remove the garden hose, prepare

a drip tray (not supplied) to collect the

condensate from the drain outlet.

• Please be sure that the height of the

drain and section of the drain hose

should not be higher than that of the

drain outlet, or the continous drainage

may not work properly.

• During Cool or Auto mode, it is

recommended to disable continuous

drainage by replacing the drain cap to

the drain outlet, to reach the maximum

performance.

If the display reads “AS”, “CS” and

“ES”, the temperature sensor has failed.

Contact your Authorized AEG

Service Center.

If the display reads “L3”, the condenser

DC fan motor has failed. Contact your

Authorized AEG Service Center.

If the display reads “E4”, the

communication between display PCB and

main control PCB is faulty. Contact your

Authorized AEG Service Center.

If the display reads “P1”, bottom tray is

full. Carefully move the unit to a drain

location, remove the bottom drain plug

and let the water drain away. Restart the

machine until the “P1” symbol disappears.

If error repeats, call for service.

7.3 Fault code

Continuous Drainage

During the DRY mode or heat pump

model, you will need a garden hose

(sold separately) or drain hose to

drain the condensate from the unit.

Follow the steps below:

7.4 Drainage instruction

To cancel the setting, press the “timer”

button again.

Garden hose

Drain hose

Fig. 21

Fig. 20

Drain cap

for Dry mode

Drain cap

for Heat Pump mode

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG AXP26U338CW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG AXP26U338CW Manual

Product: