2040
7
Zoom out
Zoom in
Previous page
1/18
Next page
6
* Nur bestimmte Modelle. * Certain models only.
11 16a
12 16b
13 16c
14
15
Vorbereitungen
11 Frontabdeckung des Geräts öffnen und kontrol-
lieren, dass Staubbeutel s-bag® und Motorfi lter
eingesetzt sind (siehe auch “Filterwechsel”).
12 Hintere Abdeckung des Geräts öffnen und
kontrollieren, dass Abluftfi lter eingesetzt ist.
13 Schlauch einführen, bis Verriegelung einrastet.
Zur Freigabe des Schlauches Verriegelung
drücken.
14 Verlängerungsrohre* oder Teleskoprohr* durch
Drehen und Zusammenschieben an Schlauchgriff
und Bodendüse anbringen. (Zum Zerlegen drehen
und auseinanderziehen.)
15 Elektrokabel herausziehen und an Steckdose
anschließen. Der Staubsauger verfügt über eine
automatische Kabelaufwicklung. Nach dem
Herausziehen des Kabels arretiert die Kabelauf-
wicklung. Zum Aufwickeln des Kabels kurz am
Kabel ziehen und dann loslassen. Das Kabel wird
dann automatisch aufgewickelt.
16a Ein- und Ausschalten des Staubsaugers durch
Knopfdruck.
16b Zum Einstellen der Saugleistung Leistungsregler
nach rechts (Max) oder Links (Min) drehen. Die
Saugleistung kann auch mithilfe der Saugsteue-
rung am Schlauchgriff eingestellt werden.
16c* Bei einem Staubsauger mit Fernbedienung die
Taste +/- drücken, um den Leistungsregler ein-
zustellen (stellen Sie sicher, dass zuvor Batterien
eingelegt wurden). Durch Drücken auf die Mitte
des Schalters lässt sich der Staubsauger eben-
falls ein-/ausschalten (sofern der Hauptschalter
des Staubsaugers eingeschaltet ist).
Deutsch
Before starting
11 Open the front cover on the machine and check
that the dust bag s-bag®, and the motor-fi lter
are in place. (See also Replacement of fi lter)
12 Open the back lid on the machine and check that
the exhaust fi lter is in place.
13 Insert the hose until the catches click to engage
(press the catches to release the hose).
14 Attach the extension tubes* or telescopic tube*
to the hose handle and nozzle by pushing and
twisting together. (Twist and pull apart to
dismantle.)
15 Extend the electric cable and connect it to
the mains. The vacuum cleaner is fi tted with a
cable winder. Once the electric cable has been
extended, it stays in that position. To rewind the
cable, give it a slight sharp pull and then release.
The cable will then automatically rewind.
16a Start/stop the vacuum cleaner by pushing the
button.
16b Adjust suction power by rotating the power
control to the right (Max) or to the left (Min).
Suction power can also be adjusted by using the
suction control on the hose handle.
16c* If you have a vacuum cleaner with remote
control, press the +/- buttons to adjust suction
control (be sure batteries have been inserted
beforehand). You can also start/stop the cleaner
by pressing the centre of the control (as long as
the main cleaner switch is set to on).
English
vivacontrol1_inlaga.indd 6vivacontrol1_inlaga.indd 6 04-05-12 13.55.3804-05-12 13.55.38
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AVC1121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AVC1121 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info