557840
19
Zoom out
Zoom in
Previous page
1/38
Next page
13
CLEANING THE HOSE AND NOZZLE
The vacuum cleaner stops automatically if the nozzle,
tube, hose or filters become blocked and when the
dust container is full. In such cases, disconnect from
mains and allow to cool for 20-30 minutes. Clear
blockage and/or replace filters, empty the dust
container and restart.
Tubes and hoses
43 Use a cleaning strip or similar to clear the tubes
and hose.
44 It may also be possible to remove the obstruction
in the hose by squeezing it. However, be careful in
case the obstruction is caused by glass or needles
caught inside the hose.
Note: The warranty does not cover damage caused to
the hose while cleaning it.
Cleaning the floor nozzle
45 Be sure to frequently clean the combination floor
nozzle. Use the hose handle to clean the nozzle.
Cleaning the turbo nozzle*
46 Disconnect the nozzle from the vacuum cleaner
tube and remove entangled threads, etc. by
snipping them away with scissors. Use the hose
handle to clean the nozzle.
47 In case the turbo nozzle stops working, open the
cleaning lid by pressing the button and remove
any objects that obstructs the turbine to rotate
freely.
TROUBLESHOOTING
The vacuum cleaner does not start
Check that the cable is connected to the mains.
Check that the plug and cable are not damaged.
Check for a blown fuse.
The vacuum cleaner stops
Check whether the dust container is full. If so,
empty it.
Is the nozzle, tube or hose blocked?
Are the filters blocked?
Water has entered the vacuum cleaner
It will be necessary to replace the motor at an
authorised AEGElectrolux service centre. Damage to
the motor caused by the penetration of water is not
covered by the warranty.
REINIGUNG DES SCHLAUCHES
UND DER DÜSEN
Der Staubsauger stoppt automatisch, wenn die Düse, das
Rohr, der Schlauch oder ein Filter verstopft oder der
Staubbelter voll ist. Ziehen Sie in diesem Fall den
Netzstecker ab, und lassen Sie den Staubsauger 20 bis 30
Minuten stehen. Beheben Sie die Verstopfung und/oder
tauschen Sie die Filter aus. Leeren Sie den Staubbehälter,
und schalten Sie den Staubsauger wieder ein.
Rohr und Schlauch
43 Rohre und Schlauch mit einem Reinigungsband
oder Ähnlichem reinigen.
44 Es ist auch möglich, die Verstopfung im Schlauch
durch Drücken und Biegen des Schlauches zu
beseitigen. Vorsichtig, falls die Verstopfung durch
Glas oder Nadeln verursacht wurde.
Hinweis: Die Garantie deckt keinerlei durch Reinigung
verursachte Schäden am Schlauch ab.
Reinigung der Bodendüse
45 Auf regelmäßige Reinigung der Bodendüse
achten. Mit dem Schlauchgriff die Düse reinigen.
Reinigung der Turbobürste*
46 Düse vom Staubsaugerrohr entnehmen und in
der Düse verwickelte Fäden etc. mit einer Schere
durchschneiden und entfernen. Mit dem
Schlauchgriff die Düse aussaugen.
47 Falls die Turbobürste nicht richtig funktioniert, die
Reinigungsklappe durch Drücken des Knopfes
öffnen und alle Gegenstände entfernen, die das
Turbinenrad behindern.
FEHLERSUCHE
Der Staubsauger startet nicht.
Prüfen, ob das Netzkabel an die Netzsteckdose
angeschlossen ist.
Prüfen, ob der Stecker und das Kabel nicht
beschädigt sind.
Prüfen, ob eine Sicherung durchgebrannt ist.
Der Staubsauger schaltet ab.
Prüfen Sie, ob der Staubbehälter voll ist. Ist dies
der Fall, entleeren Sie ihn.
Sind Düse, Rohr oder Schlauch verstopft?
Sind die Filter verstopft?
Wasser ist in den Staubsauger eingedrungen.
Es ist notwendig, den Motor in einem autorisierten
AEGElectrolux-Servicezentrum auszutauschen.
Schäden am Motor, die durch eingedrungenes Wasser
verursacht wurden, sind nicht durch die Garantie
abgedeckt.
* Nur bestimmte Modelle * Depending on the model
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG ATF7640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG ATF7640 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info