648321
2
Zoom out
Zoom in
Previous page
1/4
Next page
2
© 2012 OJ Electronics A/S - EHT Haustechnik GMBH
max. temperature until the required tempera-
ture has been reached. Then the thermostat is
turned down until the LED turns o. After 1-2
days a fine adjustment may be necessary.
INSTALLATION
Mounting on a DIN-rail. Connection according
to fig. 1.
THE SENSOR
The sensor is a NTC type. The sensor ATF 5 and
AF 5-2,5 can be used for the ATE 50 with scale
range -10/+50°C. Shape of the sensor to be
chosen after application area.
Floor sensor: Is mounted in standard conduit
embedded into the floor, and positioned
between the heating cables - and preferably
as close to the floor surface as possible. If
required, the sensor cable can be extended up
to 100 m with standard installation cable.
Room sensor: The sensor is positioned on the
wall in such a way that there is free air circula-
tion above it. Furthermore, it should be placed
in such a way that its position is not influenced
by any form of heating outlet (e.g. the sun),
draughts from doors or windows or by the
outside temperature (outside wall).
Sensor cable: The sensor cable must not run
in trunking or in bundles together with other
circuits. The sensor cable should not be laid
parallel to cables which may induce signals/
noise to the sensor signal and thus disturb the
functioning of the thermostat.
FIGURES
Fig. 1 Connection
Fig. 2 Sensor table
Fig. 3 Dimensions
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG ATE 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG ATE 50 in the language / languages: German as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info