Manual AEG ATC1600 (page 63 of 68) (English, German, French, Italian)

527896

Zoom out

Zoom in

1/68

9.5 Detaching the worktop

To remove the worktop, please proceed

as follows:

• Unscrew left and right screws at the

front.

• Unscrew left and right screws at the

back.

• Lift the worktop slightly at the front,

push back about 20 mm and lift off

from the front.

• Unscrew left and right screws at the

back.

• Store the screws in a safe place to-

gether with the worktop.

9.6 Fitting and mounting to continuous worktop

Before fitting, change the door opening

direction if necessary (see: Door reversi-

bility).

• Push the appliance carefully into the

niche.

• Take care that the mains cable is not

jammed in.

• Check distance from wall (see: Instal-

ling under a continuous worktop).

• Level the appliance by screwing the

two adjustable feet at the front in or

out, thus ensuring a stable position.

• With a suitable screws (depending on

the design of the worktop and the dis-

tance between the appliance and the

worktop, not supplied), fix the appli-

ance under the worktop through the

upper door hinge. If necessary, equal-

ize the gap between the door hinge

and the worktop with a suitable wash-

er (plastic or wood, not supplied). This

will prevent bending of the hinge and

possible failure of door function.

ENGLISH 63

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG ATC1600 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 5,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG ATC1600 Manual

Product: