654089
47
Zoom out
Zoom in
Previous page
1/66
Next page
English
47
AR4030BT-USB-CR_IM 05.07.16
2. When installing/connecting your device please note that
not every vehicle is equipped with an “ISO connection”.
In this case we recommend the use of an ISO adapter
specifically designed for your vehicle.
Adapters are available from car accessory shops and / or
from your vehicle workshop.
3. Depending on the specific car type, different wiring
connection of the “Duration +” wire (Constant current
connection) are available. (However, this is necessary for
storing the radio stations).
In order to guarantee all functions, installation in line with
these instructions is essential. In cases of doubt please
contact an authorised car workshop.
Due to the various types of motor vehicles and motor
manufacturers, it is not possible to guarantee that the pin
assignment of the ISO plug is correct, even if the ISO plug
connections fit together mechanically. It may therefore
be necessary to modify the electrical connection or use
vehicle-specific adapters.
NOTE:
If the device is correctly connected, the radio can be
switched on and off via the ignition. If the stored stations
are lost, this indicates that the radio is not receiving any
“continuous +”, current which is required for storing the
stations.
CAUTION:
Where there is a connection to “continuous +” without
the ignition being switched on, the car battery might be
drained of power even if the radio is switched off. This
may even result in the battery becoming completely flat.
4. Depending on the specific car type, interferences may
arise during operation. These interferences can avoided
easily with an additional Interferences filter. Your car
radio is originally prepared with an Interference Filter
already.
In these case, please contact your authorized car dealer.
5. When installing your radio please ensure that there is
enough space at the rear of the radio to ensure sufficient
cooling.
6. For the antenna connection there are two different norms.
The first of these is the old (50 ohm) version with a long
protruding round contact on the vehicle and a round
socket on the radio end. The second is the ISO-standard-
ised antenna plug (150 ohm). Adapters for both formats
are available from accessory manufacturers and / or your
car workshop.
NOTE:
Important information for VW / Audi vehicles: Your car
may have an active antenna. It requires a power supply
as it is provided only by original car radios. In this case,
use a phantom-powered antenna adapter.
Antenna adapters are available at car accessory suppli
-
ers and / or your automotive workshop.
Installation
Please install the car radio as shown below.
a Slide-in housing
b Extraction tool (spanner for dismantling)
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AR 4030 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AR 4030 BT in the language / languages: English, German, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info