Manual AEG AR 4026 DVD (page 35 of 46) (English, German)

480497

Zoom out

Zoom in

1/46

English

SYSTEM INFO

• Thedifferentversionnumbersofthedevicearedis-

played.

• CALIBRATION: Here you can carry out the screen

calibration.

1. In the calibration window touch the crosshairs for

approximately 1 second lightly with your ﬁnger. The

next crosshairs appear.

2. Follow the same procedure as described above for

the other three corners.

3. Once the calibration has been completed, the device

switches back to the previous operating mode.

Telephoning via Bluetooth

Bluetooth is a technology used for the wireless connection of

devices via radio over a short distance. Bluetooth technology

enables the hands-free operation of mobile telephones. This

means that while driving the car it is possible for the driver

to conduct a conversation on his or her mobile telephone

without having to hold it to his or her ear.

This device offers you the possibility of using a mobile phone

which is Bluetooth-compliant. The function radius is limited

to approximately 3 m, depending on the device.

Obtaining optimum sound quality during a telephone call

Do not set the volume too high. Otherwise feedback (a whis-

tling sound) from the loudspeakers could be the result.

 NOTE:

The volume setting depends on the installation positions

of the loudspeakers relative to the microphone, so that it is

not possible to specify it here.

Selecting Bluetooth mode

There are various ways of selecting Bluetooth mode.

• PresstheMODEkey(Fig.2/13)onthedeviceorremote

control (Fig. 1/25) repeatedly until BT MODE appears in

the display (Fig. 2/7) BT MODE.

• Holddownthe“

Bluetooth” key (Fig. 1/2) on the

remote control.

• Onthetouch-screentaptheword“MENU”orpressthe

MENU key (Fig. 1/3) on the remote control in order to call

up the device menu. Touch the BLUETOOTH key on the

touch-screen.

Pairing devices (PAIRING)

Before you can use the car radio to telephone, you have to

1. Select the Bluetooth menu on your mobile telephone

and register the car radio on your mobile telephone.

Please consult the operating manual of your mobile

telephone. The device “SCE_DVD” appears for selection

on your mobile telephone.

2. Depending on the device manufacturer, models and

software versions, you should now enter the password

“0000” in your mobile telephone.

3. If the registration has been completed successfully, the

name of your mobile telephone appears in the display of

the car radio. The “

” symbol appears in the display (Fig.

2/7).

 NOTE:

• Iftheregistrationhasnotbeencompletedsuccessfully,

the words „Not Connected“ appear on the touch-

screen (Fig. 2/1), and the „BT“ symbol and „Pairing“

ﬂash.

• Dependingonthemobiletelephonemanufacturer,

you have to repeat the registration (PAIRING) process in

order to register your mobile telephone in the car radio.

• Bluetoothcompatibilitycannotbeguaranteedfor

mobile telephones which are launched on the market

in the future.

• Inordertoguaranteeanoptimumconnection,please

ensure that the battery of your mobile telephone is fully

charged.

• Somemobiletelephonebrandshaveanenergy-saving

mode. Please deactivate the energy-saving mode, as

otherwise there may be problems when telephoning

via Bluetooth.

• Inordertobeabletoconductanincomingor

outgoing telephone call, Bluetooth has to remain

activated on your mobile telephone. Please consult the

operating manual of your mobile telephone.

• Pleaseensurethatyouspeakinthedirectionofthe

built-in microphone (Fig. 2/2). It is not possible to

connect an external microphone.

Separating devices

The devices are separated when you switch off the car radio

via the ignition or on the device itself.

Reconnecting devices

This device has an automatic reconnection function.

The precondition for this is:

• thedeviceshavealreadybeenpairedwithoneanother

• Bluetoothisactivatedinyourmobiletelephone

• yourmobiletelephonesupportsthisfunction.

After the car radio has been switched off and on again, either

by the ignition or on the device itself, the renewed automatic

connection is activated. This may take a few seconds. The

word “Connecting” is shown on the touch-screen (Fig. 2/1).

05_AR4026DVD_AEG_SK.indd 35 03.08.11 12:32

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG AR 4026 DVD in the language / languages: English, German as an attachment in your email.

The manual is 3,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG AR 4026 DVD

AEG AR 4026 DVD User Manual - French - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG AR 4026 DVD Manual

Product: