480503

AEG AR 4025 BT Manual

74
Zoom out
Zoom in
Previous page
1/102
Next page
74
ENGLISH
Installing the unit into the ISO dashboard slot
A
B
C
D
C
Detach the mounting sleeve (D) and frame (B) from
the unit housing. Use the assembly keys (C) to do so.
Fit the mounting sleeve into the ISO dashboard slot.
Bend the mounting sleeve tabs round with a screw-
driver so that the frame is mounted securely in the
dashboard slot.
Check that the frame is secure.
Connect the ISO connection of the unit to the two ISO
connectors of your vehicle.
Connect the antenna cable of the vehicle antenna to
the antenna adapter of the unit.
If necessary, also secure your unit against theft.
Fasten the screws to the mounting bracket and to the
mounting material on the engine rewall of the car.
Slide the unit carefully into the mounting sleeve, until
it clicks into place.
After all connections have been made, press the
RESET
button (26) using a ballpoint pen or other pointed
object.
Attach the control panel (A), as described under
„Attach control panel“.
CAUTION:
Possible damage to the cables!
When inserting the unit, pay attention to the cable
►
routing to prevent damage.
Then mount the frame.
Disassemble the unit
To disassemble the unit, proceed as follows:
Remove the frame.
Insert the right and left hand assembly key into the
respective slots on the sides of the unit. (The tabs are
now bent back.)
Pull out the unit.
NOTE:
If the housing is uneven, the tabs on the mounting
►
sleeve may become jammed. Use the assembly keys
to release the tabs.
Installation for Toyota or Nissan
NOTE:
Mounting sleeve, frame and mounting strip are not
►
required.
Use the threaded mounting holes on the sides of the unit
(A), to fasten the unit to the mounting brackets (supplied
with your vehicle). The holes are labeled T (for Toyota) or
N (for Nissan).
A
B
C
D
B
Loosen the mounting screws for the left and right
hand catches on the front of the unit and remove the
catches.
… 74 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AR 4025 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AR 4025 BT in the language / languages: English, German, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 9,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info