• Reassemble the brush roll in reverse order making sure it can
spin freely
Cleaning the hose and air channel
• Loosen the hose behind the nozzle from its upper connection.
• Remove any object that can be blocking the airflow in the hose or in the air channel to the dust cup, and put the hose back.
• Fäden u.ä. mithilfe einer Schere entfernen.
• Schritte oben in umgekehrter Reihenfolge ausführen, um die Bürstenrolle
wieder einzusetzen. Darauf achten, dass sich die Rolle frei drehen kann.
Reinigen von Schlauch und Luftkanal
• Obere Schlauchverriegelung hinter der Düse lösen.
• Störende Objekte, die den Luftstrom zum Staubbehälter behindern, aus dem Schlauch oder aus dem Luftkanal
entfernen. Schlauch wieder anbringen.
• Utilisez des ciseaux pour couper et enlever les ls etc.
• Remontez la brosse rotative en répétant l’opération dans l’ordre
inverse puis assurez-vous qu’elle peut tourner librement.
Nettoyage du tube d’aspiration et du conduit d’air
• Détachez la partie supérieure du tube exible qui se trouve à l’arrière de la brosse.
• Retirez tout objet pouvant bloquer le ux d’air dans le tube exible ou dans le conduit d’air allant vers le bac à poussière, puis remettez le en place.
• Con un paio di forbici tagliare ed estrarre i li e via dicendo
• Riassemblare il rullo a spazzola nella sequenza inversa
assicurandosi che possa ruotare liberamente.
Pulizia del tubo e del canale per l’aria
• Staccare il tubo dietro la spazzola dal suo collegamento superiore.
• Estrarre qualsiasi oggetto che possa ostruire il usso d’aria nel tubo o nel canale dell’aria collegato al
contenitore della polvere e montare di nuovo il tubo.
• Utilice unas tijeras para eliminar las bras y similares.
• Monte el rodillo invirtiendo el procedimiento y asegúrese de
que gira libremente
Limpieza del tubo y el canal de aire
• A oje el tubo detrás de la boquilla de la conexión superior.
• Quite los objetos que puedan bloquear el flujo de aire en el tubo o en el canal de aire hasta el colector de polvo y vuelva a colocar el tubo.
• Utilize uma tesoura para remover os os, etc.
• Monte o rolo-escova na sequência inversa e certi que-se de
que ele pode rodar livremente.
Limpar o tubo e o canal de ar
• Liberte o tubo no respectivo encaixe superior, atrás da escova.
• Remova todos os objectos que estejam a bloquear o fluxo de ar no tubo ou no canal de ar até ao recipiente do pó e volte a encaixar o tubo.
• Gebruik een schaar om de draadjes etc. te verwijderen.
• Zet de borstelrol in omgekeerde volgorde weer in elkaar en
controleer of hij vrij kan draaien.
De slang en het luchtkanaal reinigen
• Maak de slang achter het mondstuk van de bovenaansluiting los.
• Verwijder het voorwerp dat de luchtstroom in de slang of in het luchtkanaal blokkeert en maak de slang weer vast.
• Brug en saks til at erne tråde og andet med
• Saml børsterullen igen i modsat rækkefølge og sørg for, at den
kan dreje frit
Rengøring af slangen og luftkanalen
• Løsn slangen fra den øverste tilslutning bag mundstykket.
• Fjern eventuelle genstande, som kan blokere luftgennemstrømningen i slangen eller i luftkanalen til støvkoppen og sæt slangen på igen.
• Bruk en saks for å erne tråder og lignende.
• Sett sammen børstevalsen igjen i omvendt rekkefølge slik at den
spinner fritt
Rengjøre slangen og luftkanalene
• Løsne slangen bak munnstykket fra øvre tilkobling.
• Fjern eventuelle gjenstander som kan blokkere luftstrømmen i slangen eller i luftkanalen til støvkoppen og sett slangen tilbake.
• Använd en sax för att ta loss trådar osv.
• Sätt tillbaka den roterande borsten i omvänd ordning och
kontrollera att den kan snurra fritt
Rengöra slangen och luftkanalen
• Lossa slangen bakom munstycket från dess övre anslutning.
• Rensa bort alla föremål som blockerar luft ödet i slangen eller luftkanalen till dammbehållaren och sätt tillbaka slangen.
• Poista säikeet jne. saksilla.
• Asenna harjarulla takaisin paikoilleen noudattamalla ohjeita
päinvastaisessa järjestyksessä. Varmista, että harjarulla pyörii vapaasti.
Letkun ja ilmakanavan puhdistaminen
• Löysää letkua suulakkeen takana olevasta yläliitoksesta.
• Poista letkussa tai ilmakanavassa olevat mahdolliset tukokset pölykuppiin ja aseta letku takaisin paikoilleen.
• Με ένα ψαλίδι απομακρύνετε τις κλωστές κ.λπ.
• Συναρμολογήστε τη βούρτσα-ρολό εκτελώντας τις ίδιες
ενέργειες με την αντίστροφη σειρά και βεβαιωθείτε ότι μπορεί να
περιστρέφεται ελεύθερα.
Καθαρισμός του σωλήνα και του αεραγωγού
• Αποδεσμεύστε το σωλήνα πίσω από το ακροφύσιο από την επάνω σύνδεσή του.
• Απομακρύνετε τυχόν αντικείμενα που μπορεί να φράζουν τη ροή του αέρα μέσα στο σωλήνα ή στον
αεραγωγό προς το δοχείο σκόνης, και επανατοποθετήστε το σωλήνα στη θέση του.
AEG IFU-Ultrapower.indd 42AEG IFU-Ultrapower.indd 4209.07.15 11:4809.07.15 11:48
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for AEG AG5020 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of AEG AG5020 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.
The manual is 7,82 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
