618640
6
Zoom out
Zoom in
Previous page
1/48
Next page
6
7
11
12
13
15
16
17a
14
18a 18b
17b
Before starting
11 Open the front cover on the machine and check
that the motor filter and the dust container filter
are in place. (See also Cleaning/replacing the
filters.)
12* Open the back lid on the machine and check that
the exhaust filter is in place.
13 Insert the hose until the catches click to engage
(press the catches to release the hose).
3 Insert the hose into the hose handle until the
catches click to engage (press the catches to
release the hose).
14 Attach the extension tubes* or telescopic tube*
to the hose handle and nozzle by pushing and
twisting together. (Twist and pull apart to
dismantle.)
15 Extend the electric cable and connect it to the
mains. The vacuum cleaner is fitted with a cable
winder. Once the electric cable has been extended,
it stays in that position.
16 To rewind the cable, press the cord rewinder pedal.
The cable will then rewind.
17a Start the vacuum cleaner by rotaring the power
control in the direction of the “Max” position.
Increase suction power by rotaring the control
further up to “Max” position. Stop the vacuum
cleaner by rotaring in the opposite direction to
“Off” position.
In order to achieve an optimal cyclone effect in the
cleaner, the power regulation should always be in the
“Max” position.
17b* Suction power can also be adjusted by using the
suction control on the hose handle.
18 Ideal parking position for pausing (18a) and storing
(18b).
English
* Certain models only.
Avant de commencer
11 Ouvrir le couvercle avant de l'appareil et vérifier
que le filtre moteur et le filtre du réceptacle à
poussière sont bien en place (voir aussi Nettoyer/
remplacer les filtres).
12* Enlever la grille de sortie d'air et vérifier que le filtre
est bien en place.
13 Insérer le flexible jusqu'à ce que les cliquets
s'enclenchent (appuyer sur les cliquets vers
l'intérieur pour dégager le flexible).
3 Introduire le flexible dans la poignée du flexible
jusqu’à ce que les cliquets s’enclenchent (appuyer
sur les cliquets pour dégager le flexible).
14 Raccorder les tubes rigides* ou le tube télescopique*
à la poignée du flexible et au suceur en poussant
et en tournant (pour les débloquer, tourner et
tirer).
15 Tirer sur le cordon d'alimentation et le brancher sur
le secteur. L'aspirateur est équipé d'un enrouleur.
Une fois déroulé, le cordon d'alimentation
conserve sa position.
16 Pour enrouler le câble, appuyer sur la pédale de
l'enrouleur de câble. Le câble s'enroule alors
automatiquement.
17a Mettre en marche l'aspirateur en faisant glisser
le réglage de puissance dans le sens "Max".
Augmenter la puissance d'aspiration en faisant
glisser le réglage jusqu'à la position "Max". Arrêter
l'aspirateur en faisant glisser le réglage dans le
sens contraire jusqu'à la position "Arrêt".
Afin d'obtenir un effet cyclone optimal, le réglage de
puissance doit toujours être sur la position "Max".
17b* La puissance d'aspiration est également réglable à
l'aide du réglage de débit d'air sur la poignée du
flexible.
18 Position "parking" idéale pour les pauses (18a) et
pour le rangement (18b).
Français
* Suivant les modèles.
2193025-18.indd 6 2/25/09 3:50 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG ACX6206N Cyclone XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG ACX6206N Cyclone XL in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info