49525
3
Zoom out
Zoom in
Previous page
1/8
Next page
AUG 05, 2002 3 of 8 PD99025-1
When the machine is first powered up, the A/M will carry out a self-functional testing for 5 seconds and
the Dual digit display will start to running until this testing complete. Then, it will sound with a long beep
as well as a “00” show on the display. The A/M goes to the standby mode.
Answering Machine Operation
1.Turn on and off the answering machine
Press and hold the ‘On/Off’ button by 2sec The answering machine is activated on when it is
originally in off mode. It will prompt ‘Answering
machine on, Announcement one’ and a short beep is
followed. The display will shows the number of
message being recorded.
Press the ‘On/OFF’ button again (During A/M at
standby mode). To select OGM2.
A short beep will be heard then prompt
‘Announcement two’. Switch to “answer only” mode.
Press again to switch back to ‘Answer and record
mode’. To select back to OGM1.
After a short beep, then prompt ‘Announcement one’.
Switch to answer and record mode, answer with
recorded OGM.
Press and hold the ‘On/Off’ button again (for 2sec) The answering machine is turn off. Prompt
‘Answering off’ and two short beep will be heard.
The display will shows two dash ‘- -‘.
Note: When the answering machine is powered on, the status of the DTAM should be defaulted as in
answer ON mode.
2. Set up the answering machine
2.1 OGM recording
Press and hold ‘OGM’ button for 2 seconds After a long beep, A/M start the OGM recording and
the display shows ‘ Or’ to indicate OGM recording.
Press ‘Stop’ button to end recording. A long beep to indicate stop recording then play the
OGM once and followed be a long beep. The display
shows ‘OP’ to indicate OGM Playback.
Press ‘OGM’ once. To play the announcement once again, similarly ‘OP’
is displaying on the 7-segment.
To recall the default OGM by press the ‘Delete’ key
during OGM playback
Default announcement will be play on the speaker.
Toggle OGM1 or OGM2 By press the ‘STOP’ key once, the A/M will prompt
‘Announcement two’ & display ‘o2’, To press ‘STOP’
key again, it will prompt ‘Announcement one’ &
display ‘o2’.
Note: Default OGM1 – such as ‘Sorry I can’t answer call now, please leave your message after the beep’,
Default OGM2 – such as ‘Please call later’.
The time duration of OGM recording should be with 2 seconds < duration < 2 min.
2.2 Set day and time, the default day and time is “Sunday, 12:00”
Press and hold the ‘Time’ button for 2 seconds
(Set day of week)
After a short beep, the A/M is ready to set the day of
week, then, prompt ‘ Please set day, pause, then
prompt current day. The symbol “CL” will display on
the 7-segment too.
Press ‘FF’ or ‘RW’ to select days Prompt at each selection.
Press ‘Time’ button to accept day setting and jump to
“hours setting”
Prompt ‘Please set time’, pause then prompt current
hour.
Press ‘FF’ or ‘RW’ to select hours Prompt at each selection.
Press ‘Time’ button to accept the hour setting and Prompt ‘Please set minute’, pause then prompt current
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG AB300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG AB300 in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG AB300

AEG AB300 User Manual - German, Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info