462626
19
Zoom out
Zoom in
Previous page
1/48
Next page
- 18 -
Bei geraden Nähten sollten der Nadelfaden und der Spulenfaden sich in
der Mitte der beiden Stofflagen miteinander verbinden.
Wenn Sie von oben und unten auf den Stich schauen, werden Sie
bemerken, dass keine Lücken vorhanden sind. Jeder Stich ist gerade
und gleichmäßig.
Beim Einstellen der Oberfadenspannung gibt eine größere Zahl eine
höhere Spannung an.
Gründe, warum die Oberfadenspannung verändert werden sollte:
1. Der Stoff ist steif oder schwer.
2. Sie nähen mehr als zwei Lagen Stoff zusammen.
Die Spannung ist zu hoch:
Der Nadelfaden schaut oben am Stoff heraus und die Naht fühlt sich
uneben an.
Drehen Sie den Regler herunter, um die Oberfadenspannung zu
verringern.
Die Spannung ist zu niedrig:
Der Nadelfaden schaut unten am Stoff heraus und die Naht fühlt sich
uneben an.
Drehen Sie den Regler höher, um die Oberfadenspannung zu
verstärken
.
In straight seams, the needle thread and the bobbin thread should lock
together in the center of the two layers of fabric.
If you look at the top and bottom of the stitch, you will notice that there
are no gaps; each stitch is smooth and even.
When adjusting needle thread tension, the higher the number, the tighter
the needle thread tension.
Here are some reasons you may change the thread tension dial:
1. The fabric is stiff or heavy.
2. You are sewing more than two layers of fabric.
Tension is too tight:
The needle thread shows through on the topside of the fabric and it will
feel bumpy.
Turn the dial to a lower number to loosen the needle thread tension.
Tension is too loose:
The needle thread shows through on the underside of the fabric and it
will feel bumpy.
Turn the dial to a higher number to tighten the needle thread tension.
EINSTELLUNG DER OBERFADENSPANNUNG / ADJUSTING THREAD TENSION
4
Schwach
Weak
Stark
Strong
4
4
Schwach
Weak
Stark
Strong
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG 681 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG 681 in the language / languages: English, German as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info