462616
28
Zoom out
Zoom in
Previous page
1/40
Next page
- 27 -
1. Dies ist eine der gebräuchlichsten Sticharten.
2. Der Zickzack Nähfuß kann sowohl für Zickzack als auch für gerade
Stiche verwendet werden.
3. Zum Nähen dünner Stoffe sollten Sie kleinere Stichlängen
verwenden.
1. This stitching is one of most commonly used pattern.
2. The zigzag presser foot also can be used for straight stitches and
zig zag stitches
3. For sewing thinner fabrics use a smaller stitch length.
Der Zickzack Stich ist ein sehr nützlicher Stich. Wenn die Stichlänge auf
(0,3) eingestellt wird, kann der Satinstich (Muster ) zum Sticken,
Applizieren etc. verwendet werden. Bitte lockern Sie, wenn Sie diesen
Stich zum Nähen eines dünnen Stoffes verwenden, die obere Spannung
etwas und legen Stickvlies unter den Stoff oder das Futter, um ein
Kräuseln zu vermeiden. (Stellen Sie bitte bei Verwendung des Zickzack
Stiches die obere Spannung auf 1-3).
Zig-zag stitch is a useful stitch. Setting the stitch length to (0.3) the satin
stitch (pattern ) can be used for embroidery, applique, etc. When you
use this kind of stitch to sew a thin fabric, please loosen upper tension a
little and place a piece of Vliseline (stitch and tear) under the fabric or
lining cloth to avoid wrinkling. (For zig-zag stitch, please turn the upper
tension dial between 1-3).
1. Das Freiarmnähen ist zum Nähen von Ärmeln, Hosen, etc.
2. Die Nähmaschine kann als Flachbettmaschine verwendet werden,
aber auch einfach durch Herausnehmen des Anschiebetisches in
eine Freiarmmaschine verwandelt werden.
1. Free arm sewing is useful for sewing sleeves, trousers etc.
2. Your sewing machine can be used as a flat bed machine but easily
converted to free arm machine by removing the extension table.
Drücken Sie, wenn Sie bis zum Ende des Stoffes genäht haben, den
Rückwärtsknopf und nähen Sie etwa 2 - 3 Stiche vor und zurück.
Stellen Sie dann die Nadel in die höchste Position, heben Sie den
Nähfuß an und ziehen Sie den Stoff nach hinten heraus. Die Fäden
können mit dem Fadenschneider auf der Rückseite abgeschnitten
werden (siehe Pfeil).
When sewing to the edge of the fabric, push the reverse button and sew
in reverse for approx 2 cm. Then raise needle to highest position, raise
presser foot and take the fabric to rear of machine. The threads can be
cut with thread cutter placed in the back. (Arrow place)
Musterauswahlposition
Pattern selector position.
GERADSTICH / STRAIGHT STITCH
01
ZICKZACK STICH / ZIG-ZAG STITCH
FREIARMNÄHEN / FREE ARM SEWING
Vernähen / SEAM FINISHING
Fadenschneider
Cutting thread slot
03
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG 679 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG 679 in the language / languages: English, German as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info