462616
19
Zoom out
Zoom in
Previous page
1/40
Next page
- 18 -
EINSTELLUNG DER UNTERFADENSPANNUNG / BOBBIN THREAD ADJUSTMENT
Achtung:
Achtung:
Bevor Sie die Oberfadenspannung oder Unterfadenspannung verstellen, überprüfen Sie erst den Einfädelweg. Wichtig dabei ist, dass Sie
gleiche Garnstärken für Ober- und Unterfaden verwenden, z.B. Allesnäher aus Polyester. Sollten Sie unten große Schlaufen haben, kann es an
der Einfädelung der Oberfadenspannung liegen. (Es kann sein, dass der Faden nicht fest in die Oberfadenspannung eingezogen wurde.)
Bitte überprüfen Sie den Einfädlungsweg. Benutzen Sie unterschiedliche Garnstärken, empfehlen wir Ihnen eine 2. Spulenkapsel zu kaufen, damit
Sie die Grundeinstellung nicht verändern müssen.
Note:
Before you adjust the tensions please check your threading. It is important that you use the same thread size for upper- and lower thread. Should
there be great loops check upper thread tension. If you use different yarn sizes we recommend a second bobbin case, so there is no need to adjust
the initial setting.
EINSTELLUNG DER SPANNUNG FÜR ZICKZACK STICH UND STICKEREIEN/
ADJUSTING TENSION FOR ZIGZAG AND EMBROIDERY
Die Oberfadenspannung sollte etwas niedriger sein, wenn Sie Zickzack-
oder Satinstiche nähen. Der obere Faden sollte leicht auf der Unterseite
des Stoffes durchkommen.
The upper thread tension should be slightly weaker when sewing a zig
zag or a satin stitch. The upper thread should appear slightly on the
down
side of the fabric
.
Verringern
Decrease
1.
Drehen Sie die Schraube durch das Loch hindurch links herum, um
die Spannung zu verringern.
2. Die untere Fadenspannung ist bereits eingestellt. Verstellen Sie
diese nicht, wenn es nicht wirklich erforderlich ist.
1 Turn the screw to the left to decrease the tension.
2 The lower thread tension is already adjusted, do not adjust
it if it is not necessary.
Erhöhen
Increase
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG 679 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG 679 in the language / languages: English, German as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info