617389
59
Zoom out
Zoom in
Previous page
1/91
Next page
( 28 )
TROUBLE SHOOTING GUIDE
Check items below before calling for service.
Problem Cause Corrective action Page
Needles break
1. Needles are bent, blunt or
points are damaged.
2. Needles not inserted
correctly.
3. You have forcibly pulled the
fabric
1. Replace with new needles.
2. Insert the needles correctly to
the needle clamp.
3. Guide fabric gently with both
hands.
20
20
Thread breaks
1. Threading is incorrect.
2. Thread tension is too tight.
3. Needles not inserted
correctly.
1. Thread the machine correctly.
2. Reset the thread tension.
3. Insert the needles correctly to
the needle clamp.
1011
1314
20
Skipped stitches
1. Needles are bent, blunt or
points are damaged.
2. Needles not inserted
correctly.
3. Threading is incorrect.
4. Wrong needles used.
1. Replace with new needles.
2. Insert the needles correctly to
the needle clamp.
3. Thread the machine correctly.
4. Use correct needles. (HA×1 or
130/ 705H)
20
20
1011
20
Stiches are
irregular
1. Thread tension is not
correct.
2. Thread is caught.
1. Correct the thread tension.
2. Check threading path of each
thread.
1213
910
Seam puckering
1. Thread tension is too tight.
2. Threading is incorrect.
3. Thread is caught.
4. Differential feet not set.
1. Correct the thread tension.
2. Thread the machine correctly.
3. Check threading path of each
thread.
4. Set differential feed to “S”.
1314
1011
1011
27
Fabric not
cutting neatly
1. Upper cutter is blunt or
wrongly positioned.
1. Replace or adjust the cutter.
21
Fabric edges
curl
1. Too much fabric is within the
stitch.
1. Re-adjust seam width.
19
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG 3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG 3500 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info