462635

AEG 2704 Manual

32
Zoom out
Zoom in
Previous page
1/37
Next page
- 31 -
SÄUMEN (Sonderzubehör) / HEMMING (Optional)
1. Heben Sie den Nähfuß an und stellen Sie die Nadel ganz nach oben.
2. Falten Sie den Stoffrand 2 Mal etwa 3 mm und legen Sie ihn unter den Nähfuß. Senken Sie den Nähfuß und nähen Sie ein paar
Stiche und lassen Sie die Nadel im Stoff stecken.
3. Heben Sie den Nähfuß und ziehen Sie dann den gefalteten Stoff in die spiralförmige Öffnung des Rollsaumfußes.
4. Zum Nähen halten Sie mit der linken Hand den Stoffrand etwas nach links mit der rechten Hand halten Sie den Vorderrand des
Stoffes und neigen ihn etwa 10 Grad nach links. Beginnen Sie dann mit dem Nähen. Sichern Sie das Nahtende mit ein paar Stichen.
Verwenden Sie nur geeignete Stoffe. Es ist etwas Übung erforderlich, um optimale Resultate zu erhalten.
1. Raise the presser foot and the needle to its highest position.
2. Fold the fabric edge twice about 3 mm and place it under the foot. Lower the presser foot and sew a few stitches. Keep the needle
in the fabric.
3. Raise the presser foot and insert the folded fabric into the spiral opening of hemmer foot.
4. During the sewing, left hand holds on the fabric edge to the left. Right hand holds on the fabric front edge, lead about 10 °to left.
Then start sewing. Secure the folded edge with a few stitches.
Only suitable materials can be used and some practice may be necessary to achieve best results.
1. Während des Nähens schlagen Sie den Stoff leicht nach links ein, damit er frei in die Rundung des Rollsaumfußes gleitet.
2. Achten Sie darauf, dass der Stoff nicht unter den rechten Teil des Fußes rutscht.
Er muss so unter die Rundung des Fußes geführt werden, dass die Saumfalte frei hindurchlaufen kann.
1. While sewing fold the fabric to the left a little and allow it to run into the hemmer foot.
2. Make sure that the fabric does not move under the right part of the foot. The fabric must be fed into the scroll of the hemmer so that
the workpiece edge runs freely through the groove under the foot.
1 mm
3 mm
20 mm
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG 2704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG 2704 in the language / languages: English, German as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info