462615
10
Zoom out
Zoom in
Previous page
1/40
Next page
- 9 -
1. Schalten Sie die Maschine aus.
2. Stellen Sie die Nadel in die höchste Position und heben Sie den Nähfuß
an.
3. Drücken und entriegeln Sie den Hebel wie dargestellt. Entfernen Sie den
Nähfuß.
1. Turn off power.
2. Raise needle bar to its highest position and raise the presser foot.
3. Press release lever as shown, remove presser foot.
1. Legen Sie den Nähfußstift direkt unter die Einkerbung des
Nähfußschaftes.
2. Senken Sie den Nähfußlifter ab.
3. Drücken Sie den Schaft in den Nähfußsteg. Der Schaft rastet in den Fuß
ein.
1. Place the presser foot pin right under the groove of the foot holder.
2. Lower the presser lever.
3. Press the presser lever, the lever bar will lock the foot in place.
1. Schalten Sie die Maschine aus.
2. Heben Sie den Nähfuß an.
3. Drehen Sie die Schraube mit dem Schraubendreher gegen den
Uhrzeigersinn, um den Schaft zu entfernen.
4. Zum Anbringen legen Sie den Schaft auf die Nähfußsohle. Senken
Sie den Nähfußlifter. Drehen Sie die Schraube im Uhrzeigersinn
fest.
1. Turn off power
2. Raise the presser foot.
3. Turn the screw counterclockwise with the screwdriver to
remove the shank.
4. When attaching, place shank on presser bar. Lower the presser
foot lever. Turn screw clockwise to tighten.
ABNEHMEN UND ANBRINGEN DES NÄHFUßSCHAFTES / HOW TO REMOVE AND
ATTACH THE SHANK
AUSWECHSELN DES NÄHFUSSES / REPLACING PRESSER FOOT
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG 11679 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG 11679 in the language / languages: English, German as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info