551553
18
Zoom out
Zoom in
Previous page
1/36
Next page
aee.com
-15-
Operations
1. Insert a Micro SD card into the SD21 video camera.
Note: Use a branded Micro SD card, for example, Transcend Class 10 memory card.
2. Powering on the SD21 Video camera
Turn the power switch to the ON position to power on the SD21 video camera. At this time, the red indicator is on, and
the SD21 video camera changes to the preview state.
Note:
a. If the battery power is low, the” “symbol is displayed on the TFT screen together with a promot.
b. If no Micro SD card is inserted, no symbol is displayed in the bottom-right corner of the TFT screen.
3. Recording a Video
In the preview state, press the ”Video” key to start video recording. The video recording duration is displayed in the
upper-right part of the TFT screen. The "Video/Audio indicator (green)" and the "Video/Photo indicator (green)" on the
top of the video camera blink slowly. The recording duration is correctly displayed on the LCD segment screen. During
video recording, the video camera responds only to operations for the zoom in (+) and zoom out () keys. Press the
Stop” key once to stop and save the currently recorded video file, and the video indicator (green) on the front side is
off. The video camera restores to the preview state. The recording duration disappears on the LCD segment screen.
Note:
a. During video recording, turn the power switch to the “OFF” position to power off the video camera after saving the
currently recorded file.
b. During video recording, if the battery power runs low, the system saves the currently recorded file and enters standby
mode, displaying a prompt of “Low battery ” on the TFT screen, until the video camera is powered off.
c. During video recording, if the Micro SD card is full, the system saves the currently recorded file. The system also displays
a message “Card full” on the TFT screen, indicating that the Micro SD card is full. In addition, the duration for video
recording stops on the LCD segment screen, and the system restores to the preview state.
d. In cyclic recording mode, the system automatically saves a file every 15 minutes. (The cyclic recording function and the
pre-video function cannot be simultaneously enabled.)
e. If the D23 backup battery is provided and fully recharged, the video camera can continuously record video programs
for about four hours and record audio programs for about seven hours.
f. In WVGA/100 and WVGA/120 modes, the video camera does not support the time display, zooming, and 180° photo
rollover functions. In 1080i/50 and 1080i/60 modes, the video camera does not support the time display function.
g. In audio recording mode, the volume cannot be adjusted by pressing the “+” or “” key. In playback, however, the
volume can adjusted by pressing the “+” or “” key.
h. If the video camera provides a TFT screen and is in the preview state, after using a HDMI patch cord to connect the video
camera to a HD display device, you can perform basic operations for the video camera on the HD display device (These
basic operations, however, cannot be performed if no TFT screen is available on the video camera).
4. Taking a Picture
Before taking a picture, perform the following operations to set the image resolution.
— Press the “M” key to display the setup interface.
— Press the “>” key to display the camera setup interface ( ).
— Press the “+” or “” key and choose “Image Resolution”.
— Press “OK” to display the resolution setup menu.
You can set the resolution to any of the following three modes:
3M, with an image resolution of 2048 x 1536.
5M, with an image resolution of 2592 x 1944.
8M, with an image resolution of 3200 x 2400.
Four photo shooting modes are available for the video camera.
a. single shot (the default mode)
In the preview state, press the “Photo” key once to take a picture while the system generates a click tone. The green
indicator on the front side of the video camera also blinks once (the shooting icon on the LCD segment screen blinks
once), and the video camera restores to the preview state.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEE MagiCam SD21G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEE MagiCam SD21G in the language / languages: English as an attachment in your email.

The manual is 4,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEE MagiCam SD21G

AEE MagiCam SD21G User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info