636052
132
Zoom out
Zoom in
Previous page
1/266
Next page
PK-232 OPERATING MANUAL Pactor OPERATION
Monitoring two linked Pactor ARQ stations does not provide the error
correction enjoyed by the linked stations. Since your PK-232 is not
part of the 'handshake" you do not generate the request for repeat.
Your PK-232 will check for the correct CRC error check and will not
display messages with errors. Missing blocks will be designated with
four error symbols. The default error symbol is the underline (_).
See the command summary for ERchar, the error symbol.
Your PK-232 will not print a block of data if that block contains the
same sequence number as the previous block. If the "ISS" (Information
Sending Station) is repeating the same block, you won't print it twice.
11.9 Pactor MailDrop Operation
The PK-232 allows Pactor as well as Packet access to the MailDrop.
Messages that originate in Packet or AMTOR can be accessed remotely in
Pactor and messages that originate from a remote Pactor station can be
accessed by Packet and AMTOR users of your MailDrop. This section of the
manual talks about basic Pactor mailbox operation. Section 11.10 will
discuss how to pass message traffic from Pactor to Packet and AMTOR and
vice versa.
Make sure that you understand MailDrop Operation in chapter 5 And the
basic Pactor operation described earlier in this chapter before putting
your Pactor MailDrop on the air.
11.9.1 Special Operating Considerations
The Pactor MailDrop has been designed with a "Watchdog" safety feature so
that it may perform safely without constant attention. If a remote
station is linked with your Pactor MailDrop and no traffic is passed for 5
minutes, the link will drop and your transmitter will shut off.
With this in mind, we have designed the Pactor MailDrop so that it can be
disabled at any time during an ARQ link simply by turning the command
TMAIL (TOR MAIL) OFF. This allows you the SYSOP to make your MailDrop
available to other stations and still break in to chat with remote
stations at any time. This could come in handy should you want to provide
some help or information to a remote station using your Pactor MailDrop.
11-9.2 Settings for Pactor MailDrop Operation
Before a remote Pactor user can access your MailDrop, be certain that
MYPTCALL and/or MYCALL is set to your Amateur callsign.
2/93 11-11
132


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEA PK-232 MBX - Pakratt 232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEA PK-232 MBX - Pakratt 232 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEA PK-232 MBX - Pakratt 232

AEA PK-232 MBX - Pakratt 232 User Manual - English - 199 pages

AEA PK-232 MBX - Pakratt 232 User Manual - English - 217 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info