636052
126
Zoom out
Zoom in
Previous page
1/266
Next page
PK-232 OPERATING MANUAL Pactor OPERATION
Type in your CQ message. Make sure you include YOUR Callsign. An
example is shown below:
CQ CQ CQ CQ CQ CQ CQ DE N7ML
CQ CQ CQ CQ CQ CQ CQ DE N7ML
CQ CQ CQ CQ CQ CQ CQ DE N7ML
CQ CQ CQ CQ CQ CQ CQ DE N7ML K
<CTRL-D>
Type <CTRL-D> at the end of your CQ call. The <CTRL-D> puts your radio
into the receive mods and your PK-232 into the Pactor standby mode
where it is ready for a call.
Pactor standby is different from the Pactor Listen mode. In Pactor
standby, your PK-232 is ready to receive Pactor connects, but you will not
be able to monitor other Pactor stations.
Wait a bit to see if you get a response. Your transmitter will begin
to key on and off and you will see a CONNECTED message when someone
calls you in Pactor. If you do not get a response, you can repeat the
above procedure or you can go look for other Pactor stations as
described in the next section.
11.6.3 Answering an Unproto Pactor CQ
You must be in the Pactor Listen (PTL) mode to monitor other Pactor
stations. When you are in the Pactor Listen mode, you can monitor both
the 1 second "chirps" of connected Pactor stations, and the continuous
transmissions of unprotocol Pactor stations calling CQ.
Normally when you see a station calling CQ in unproto Pactor, you will
want to answer him using ARQ Pactor. Remember that ARQ Pactor is the
protocol that has the smallest chance of transmission errors.
Let's assume you hear N7ML calling CQ. To answer, do the following:
If you are using the Timewave or AEA PAKRATT for WINDOWS program, check
the program manual for instructions on starting an ARQ Pactor contact.
If you are using a terminal or terminal emulation-program, simply type
“PTC N7ML<Enter>" to start a Pactor contact. After your PK-232 has
locked or synchronized with the distant station, which will be
indicated by the LED display changing from PHASING to IDLE, you will
see a CONNECTED message on your screen. You may then begin your
conversation.
N7ML DE YOURCALL ... etc
When you finish typing your comments or traffic to the other station
and wish the distant station to transmit to you will need to type "KKK"
or "BTU" to let the other station know that you are going to change the
link direction.
Then, type a <CTRL-Z> (Hold the "CTRL" key down while typing the Z) to
turn the link over to the other station.
2/93 11-5
126


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEA PK-232 MBX - Pakratt 232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEA PK-232 MBX - Pakratt 232 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEA PK-232 MBX - Pakratt 232

AEA PK-232 MBX - Pakratt 232 User Manual - English - 199 pages

AEA PK-232 MBX - Pakratt 232 User Manual - English - 217 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info