636052
123
Zoom out
Zoom in
Previous page
1/266
Next page
PK-232 OPERATING MANUAL Pactor OPERATION
11.3 PK-232 Pactor Parameter Settings
Pactor is a bit more complex than Baudot or ASCII operation. Pactor
operation requires you to have MYPTCALL or MYCALL entered before you can
operate. If you do not enter MYPTCALL, the call in MYCALL will be used as
the default callsign. Pactor stations can't use the SubStation
XDentification number (SSID) in MYCALL.
11.3.1 Entering Your Callsign (MYPTCALL)
If you have not already done so, enter your call after the commnand prompt
(cmd:) using the MYPTCALL command. For example, if your call is WX5FAP,
you would type:
cmd:MYPTCALL WXSFAP <Enter>
The PK-232 will respond with;
MYPTCALL was PK232
MYPTCALL now WX5FAP
If you do not enter a call using MYPTCALL, the PK-232 will use the call
entered in MYCALL. MYCALL does not allow punctuation other than the dash
(-). MYPTCALL does allow punctuation in the call. This allows you to
properly identify when operating portable, e.g. MYPTCALL ZL2/KGRFK.
If a callsign has not been entered in either MYCALL or MYPTCALL, the PK-
232 will not allow you to transmit in Pactor.
11.3.2 Enter the Pactor Mode
If you are using the Timewave PAKRATT for WINDOWS program, follow the
instructions in the program manual to enter the Pactor mode.
If you are using a terminal or computer with a terminal emulation program,
simply type "Pactor" or PT, from the Command Mode followed by the <Enter>
key to enter the Pactor mode.
The PK-232 responds by displaying the previous mode, for example, from
packet:
cmd: PT <Enter>
The PK-232 will respond with:
Opmode was PAcket
Opmode now PACtor
Your PK-232's front panel STATUS display will show that you are in the
Standby mode (both Standby LEDs lit), and the CMD (CoMmanD) LED will be
lit. There is no front panel LED for the Pactor mode.
2/93 11-2
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEA PK-232 MBX - Pakratt 232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEA PK-232 MBX - Pakratt 232 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEA PK-232 MBX - Pakratt 232

AEA PK-232 MBX - Pakratt 232 User Manual - English - 199 pages

AEA PK-232 MBX - Pakratt 232 User Manual - English - 217 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info