636052
75
Zoom out
Zoom in
Previous page
1/266
Next page
The number "18396 free" is the RAM available for MailDrop messages.
While you're "logged on" to your MailDrop, a connect request from
another station will cause the PK-232 to send the "BUSY" frame to the
distant station. When you are finished using your MailDrop, type "B"
(BYE) to "log off" your MailDrop. This will return your PK-232 to
normal operation and make the MailDrop available to other stations.
In Packet mode, you must leave the MAILDROP command ON to make it
available for others. No other stations can reach your MailDrop
unless the MAILDROP command is turned ON. In AMTOR, TMAIL must be ON.
You have full control of your PK-232 while the MAILDROP is ON. You
can connect to others and carry on normal QSOs using the call sign in
MYCALL provided you have entered a separate MYMAIL MailDrop callsign.
5.2.1 Monitor MailDrop Operation
Set MDMON to ON to monitor other stations' use of your MailDrop. Set
MDMON OFF (default) to cancel MailDrop monitoring. User bit 13 allows
MailDrop connect and status messages to be disabled as well. See the
UBIT command in the command summary for specifics.
The MDMON command permits you to monitor a station's activity on your
MailDrop showing you both sides of the QSO. Packet headers are not
shown while a caller is connected to your MailDrop. When a caller is
connected to the MailDrop, MCON determines what packets are monitored.
When your MailDrop is idle, MONITOR determines what packets are seen.
5.2.2 Caller Prompts
MTEXT is the MailDrop connect-message prompt sent to a packet station
connecting to the MailDrop if MMSG is ON. The default message is:
"Welcome to my AEA PK-232M maildrop.
Type H for help."
MDPROMPT is the Message prompt sent to a station by the MailDrop.
This prompt is given to a station sending a message. You can enter
any text with a maximum length of 80 bytes. The default prompt is:
"Subject:/Enter message, ^Z (CTRL-Z) or /EX to end"
You may wish to enter a CTEXT message announcing the presence of a
mailbox and the call sign (MYMAIL) used to access your MailDrop.
5.3 SYSOP MailDrop Commands
While you have logged on to your MailDrop from your local keyboard
with the MDCHECK command, the commands available to you are:
B, E, K, L, R, S.
These are the "standard" BBS commands available to the MailDrop SYSOP.
Any other command sent by you is answered with the error message
"*** What?". A brief description of each command follows. All the
available commands are described in detail following the next section.
8/91 5-2
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEA PK-232 MBX - Pakratt 232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEA PK-232 MBX - Pakratt 232 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEA PK-232 MBX - Pakratt 232

AEA PK-232 MBX - Pakratt 232 User Manual - English - 199 pages

AEA PK-232 MBX - Pakratt 232 User Manual - English - 217 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info