636052
69
Zoom out
Zoom in
Previous page
1/266
Next page
PK-232 OPERATING MANUAL PACKET RADIO
Second, all Packet Lite connections emulate AX.25 version 2.0 (RR polling
instead of retrying I-frames). This is necessary for the 10 minute
identification described below. Also, the main reason version 1 continues
to be used on HF is that on a retry a (RR,P) polling frame is BO long that
one might as well just send the I-frame again. Packet Lite's polling and
ack frames are so short that the AX.25 version 2.0 polling method is now
worth doing.
4.10.1 Enabling Packet Life
To begin using Packet Lite, first make sure you have made all the proper
HF Packet settings discussed earlier in this chapter. Be especially
careful to ensure VHF is OFF and HBAUD is set to 300.
Once these settings have been made, to enable the Packet Lite protocol
extensions, turn the PK-232 command LITE ON. You must not be connected to
any other stations or you will not be allowed to change the LITE command.
Initiating a Packet Lite Connection
Once all the above settings have been made, simply issue the standard
CONNECT request as described earlier in the chapter.
If the station you are connecting to also has the command LITE ON, a
Packet Lite connection will result and you and the distant station should
enjoy a more reliable QSO than others on the same frequency.
4.10.2 Compatibility With Standard AX.25 Stations
If the station you connect to does not have the Packet LITE protocol
extensions, there are three known possibilities of what will occur.
1. WAlABC>WB2XYZ [C,P] 01 3E 38 58 32 {Packet Lite attempt}
WB2XYZ>WAlABC (UA,F) {standard ack}
In this case, the non-Lite station sees the [C,P] control byte but ignores
the non-standard bytes following it. It replies with a standard UA frame,
and the connection proceeds as standard AX.25.
2. WAIABC>WB2XYZ [C, P] 01 3E 38 58 32 {packet Lite attempt}
WB2XYZ>WAlABC (FR): 3F 00 03 {Frame Reject}
WAIABC>WB2XYZ (C, P] {Standard attempt}
WB2XYZ>WAlABC (UA, F) {Standard ack}
In this case, the non-Lite station notices the non-standard bytes
following the control byte and issues a FP-MR (Frame Reject) to signify
that a protocol violation has taken place. The PK-232 receives the FRMR
and automatically reverts to standard AX.25, sending the connect retries
without the Lite PID and address bytes.
2 /93 4-28
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEA PK-232 MBX - Pakratt 232 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEA PK-232 MBX - Pakratt 232 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEA PK-232 MBX - Pakratt 232

AEA PK-232 MBX - Pakratt 232 User Manual - English - 199 pages

AEA PK-232 MBX - Pakratt 232 User Manual - English - 217 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info