521958
10
Zoom out
Zoom in
Previous page
1/244
Next page
Installation and Operation Manual S400 series 9
2.2.4. Countdown timer
Once CHRONO is displayed, trigger it by pressing simultaneously on the +
keys.
The countdown starts from the data displayed (which can be configured between 1
and 10 minutes, see menu paragraph 2.5.6.). A long beep signals when the
countdown switches to the full minute. The end of the countdown is signalled by a
short beep every second for the last 5 seconds followed by a long beep to mark the
end of the countdown.
When the countdown is finished, the countdown timer counts the navigation time in
hours/minutes (with two points flashing per second).
Press again simultaneously for at least 2 seconds on the + keys during the
countdown to stop it and reset the display to the selected value.
2.2.5. Backlighting
The display and the 4 keys are backlit, with 4 levels of intensity. Level "0" corresponds
to backlighting switched off.
To control backlighting:
Press the key to display the backlighting page, then the
and keys to adjust the lighting level from 0 to 4.
Pressing again on the key send the lighting level on the
bus to control backlighting on other device displays.
2.3. Alarms
The icon is lit when at least one alarm has occurred on one item of data managed
by the SPEED display. A sensor alarm appears when it is activated (different from 0)
and the measurement has exceeded the high or low threshold previously defined. This
alarm is then shown by:
The flashing icon
The data concerned by the alarm flashing,
Automatic lighting of the LCD backlighting to its highest level,
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AdvanSea SPEED S400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AdvanSea SPEED S400 in the language / languages: All languages as an attachment in your email.

The manual is 5,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AdvanSea SPEED S400

AdvanSea SPEED S400 User Manual - English - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info