634480

AdvanSea FX-400 Manual

17
Zoom out
Zoom in
Previous page
1/183
Next page
User manual FX-400 - 17 -
•
Release the PTT button and listen for a reply.
•
Once contact is made on the Primary Calling Channel, each vessel
must switch to a working channel to continue conversation. Refer to
the channel chart for proper usage.
•
After communication is completed, each vessel must give its call sign
or vessel name and switch to the Primary Calling Channel and resume
listening watch.
6.3 Working Channel Recall
Rather than using the SELECT/ENT knob or microphone keys to change
channels, this feature allows quick switching between the last working
channel and the current primary channel.
To quickly switch between the last working channel and the Primary Calling
Channel:
•
Use the SELECT/ENT knob or microphone keys to select a working
channel, such as channel 68.
•
Press the
key momentarily. The current primary channel
number appears in the channel number display.
•
Press the
key again momentarily. The working channel
number appears in the display. Each time the key is pressed, channel
selection toggles between the primary channel and the working
channel.
6.4 Transmitter Power Setting
The transmitter has two power settings, 25 watts or 1 watt, which are
indicated by HI or LO appearing in the upper line of the display. The normal
power setting is HI for all channels where 25 watts is allowed. Use the 1
watt setting for communication with nearby vessels (bridge-to-bridge) or
facilities (drawbridges).
•
Press the
key to toggle transmitter power between 25 watts
and 1 watt output.
SPECIAL NOTE
Channels 15, 17, 75 and 76 are restricted to 1 watt maximum power and will
cause the error beep if the HI/LO key is pressed.
6.5 Channel Scanning
There are three channel scanning modes; Priority Scan, All Scan and Memory
Scan. In the Priority Scan mode, Channel 16 is checked for activity every 2
seconds, even if, the scan is halted by traffic on a working channel. When
scanning is halted by traffic, the scan pauses while the channel is active.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AdvanSea FX-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AdvanSea FX-400 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info