672652
11
Zoom out
Zoom in
Previous page
1/16
Next page
PHONO INPUT AND GROUND TERMINAL
You can connect your turntable on the RCA connectors left (L) and right (R). Turntables
normally includes a single wire earth lead. Use the phono ground connector to connect
this lead. Unscrew the terminal to expose the hole which will accept the lead. After inser-
tion, tighten the terminal to secure the lead.
PRE-OUT 1 / PRE-OUT 2
PRE-OUT 1 et PRE-OUT 2: Votre préamplificateur possède deux sorties stéréophoniques
pré-out. Le niveau du signal varie en tournant le bouton de volume de votre préamplifica-
teur. Connectez les entrées L (gauche) et R (droite) de votre amplificateur de puissance
aux sorties PRE-OUT 1 ou PRE-OUT 2 L et R de votre préamplificateur. Vous pouvez
aussi utiliser ces sorties avec un processeur ou égaliseur. L’intégralité de la bande pas-
sante est transmise à l’amplificateur de puissance.
PRE-OUT 1 / PRE-OUT 2
PRE-OUT 1 and PRE-OUT : Your preamplifier have two pre-out ouputs, PRE-OUT 1 and
PRE-OUT 2. The output level of those pre-out can be adjusted by the volume button of
your preamplifier. Connect L and R input from your power amplifier to one of those pre-
out. You can chose PRE-OUT 1 or PRE-OUT 2. You also have the possibility to use on
those connectors signal processors such as equalizers.
SORTIES SYMETRIQUES (BAL. R et BAL. L)
Si votre amplificateur de puissance est équipé d’entrées symétriques, vous pouvez relier
ses prises symétriques (gauche et droite) aux sorties symétriques de votre préamplifica-
teur.
BALANCED PRE-OUT (BAL. R et BAL. L)
If your power amplifier has balanced inputs, you have the possibility to connect it on the
balanced outputs of your preamplifier MPP-506.
INDICATEUR DE TENSION
Votre préamplicateur est équipé d’un sélecteur automatique de la tension secteur. Le
voyant bleu indiquera la tension d’alimentation détectée (115 ou 230V).
VOLTAGE INDICATOR
An automatic voltage detector is used on your preamplifier. One of those two leds will indi-
cate the voltage that has been detected when your preamplifier is plugged in the outlet.
The leds will indicate 115V or 230V.
r
t
y
u
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Advance Acoustic X-Preamp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Advance Acoustic X-Preamp in the language / languages: English, French as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info