471524

Advance Acoustic MPP-506 Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
PHONO INPUT, MM/MC SWITCH AND GROUND TERMINAL
You can connect your turntable and adjust the cartridge type (MM or MC cartridge).
Turntables normally includes a single wire earth lead. Use the phono ground connector
to connect this lead. Unscrew the terminal to expose the hole which will accept the lead.
After insertion, tighten the terminal to secure the lead.
PRE-OUT / SUBWOOFER OUT / HIGH PASS OUT / CROSSOVER FREQUENCY
PRE-OUT: Connectez les entrées L (gauche) et R (droite) de votre amplificateur de puis-
sance aux sorties L et R de votre préamplificateur. Vous pouvez aussi utiliser ces sorties
avec un processeur ou égaliseur. L’intégralité de la bande passante est transmise à l’am-
plificateur de puissance.
SUBWOOFER OUT: Connectez ici un amplificateur additionnel destiné à un subwoofer
passif ou utiliser directemment ces sorties sur un subwoofer amplifié (actif).
CROSS OVER FREQUENCY: Appuyer sur ce bouton pour commuter la fréquence de
coupure de cette sortie en 75 ou 150Hz.
HIGH PASS OUT: Si vous utilisez un caisson de graves (subwoofer), vous pouvez alors
connecter votre amplificateur de puissance sur ces PRE-OUT. Seules les fréquences
supérieures à 75 ou 150Hz transiteront par cette sortie.
PRE-OUT / SUBWOOFER OUT / HIGH PASS OUT / CROSSOVER FREQUENCY
PRE-OUT: These connections allow you to connect L and R input from your power ampli-
fier here. You also have the possibility to use on those connectors signal processors such
as equalizers.
SUBWOOFER OUT: Connect this outputs to the subwoofer power amplifier to drive your
subwoofer speaker, or connect to the subwoofer speaker with built in amplifier.
CROSSOVER FREQUENCY 150Hz/75Hz: Press this button to set the crossover frequen-
cy of the subwoofer at 150Hz or 75Hz.
HIGH PASS OUT: If you are using the SUB OUT with an active subwoofer, then, you can
connect your power amplifier on those HIGH PASS OUT. In this case, please note that
only frequencies upper to 75 or 150Hz will pass through.
SORTIES SYMETRIQUES (BAL. R et BAL. L)
Si votre amplificateur de puissance est équipé d’entrées symétriques, vous pouvez relier
ses prises symétriques (gauche et droite) aux sorties symétriques de votre préamplifica-
teur.
BALANCED PRE-OUT (BAL. R et BAL. L)
If your power amplifier has balanced inputs, you have the possibility to connect it on the
balanced outputs of your preamplifier MPP-506.
SELECTEUR BOOST EQ
Les enceintes de petit volume rencontrent des difficultés à reproduire les fréquences gra-
ves, néanmoins, elle peuvent supporter dans leur grande majorité un important niveau de
grave sans distorsion ou dommage. Notre processeur BOOST EQ (en position ON) per-
r
t
y
u
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Advance Acoustic MPP-506 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Advance Acoustic MPP-506 in the language / languages: English, French as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info