471583
14
Zoom out
Zoom in
Previous page
1/18
Next page
l’ampli. Avec certaines platines, le branchement d’un câble de terre peut
causer un ronflement. Dans ce cas, débranchez-le. Si la platine a une cartouche de type
MC (à bobine mobile), vous devez utiliser un préamplificateur phono MC du commerce.
Dans ce cas, branchez la platine disque à l’entrée phono du préamplificateur et
branchez la sortie phono du préamplificateur aux prises PHONO L/R de l’ampli.
PHONO INPUT
The amplifier’s PHONO input jacks are for use with moving-magnet (MM) type cartridges.
Use an analog audio cable to connect the amplifier’s PHONO L/R jacks to the audio out-
put jacks on the turntable.
Notes: if the turntable has a ground wire, connect it to amplifier’s ground terminal. With
some turntables, connecting the ground wire may cause hum, in which case it should be
disconnected. If the turntable has a moving-coil (MC) type cartridge, you’ll need to add a
MC phono preamp. In this case, connect the turntable to the phono preamp’s input, and
connect the phono preamp’s output to the amplifier’s PHONO L/R jacks.
PRE OUT / SORTIES PREAMPLIFICATEUR
Si vous souhaitez utiliser un amplificateur de puissance plus puissant et utiliser le MAP-
102 comme préamplificateur, branchez-le aux prises PRE OUT et connectez toutes les
enceintes et le caisson de grave à l’amplificateur de puissance.
PRE OUT / PREAMPLIFIER OUTPUTS
If you want to use a more powerful power amplifier and use the MAP-102 as a preampli-
fier, connect it to the PRE OUT jacks, and connect all speakers to the power amplifier.
PRE OUT 2 / CONNECTER UN SUBWOOFER OU AUTRE AMPLI DE PUISSANCE
Vous pouvez brancher un autre amplificateur de puissance ou un caisson de grave actif
(caisson amplifié). Cette sortie stéréophonique est ajustable par le bouton de volume
général.
PRE OUT 2 / CONNECTING ANOTHER POWER AMPLIFIER OR SUBWOOFER
These jacks allow you to connect another power amplifier or an active subwoofer
(subwoofer with built-in amplifier). To connect them use an analog audio cable to connect
the amplifier’s L/R PRE OUT 2 jacks to the analog audio input jacks of your powered
subwoofer or power stereo amplifier.
AMP. IN / POWER AMPLIFIER IN
Si vous souhaitez utiliser uniquement la section amplificateur de puissance de votre MAP-
102, connecter sur les prises L/R AMP IN votre autre préamplificateur ou table de mixage
o
r
r
y
y
t
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Advance Acoustic MAP-102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Advance Acoustic MAP-102 in the language / languages: English, French as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info