618546

Adobe Premiere Pro CC - 2015 Manual

510
Zoom out
Zoom in
Previous page
1/519
Next page
504
Exporting
Last updated 11/30/2015
6 Close other programs that might be running on your computer.
Your computer is now ready to export your sequence directly to tape.
Export a sequence to tape with device control
Before you export to videotape using device control, make sure that both the computer and the camera or deck are set
up properly, as you would when capturing video with device control (see
Set up device control).
If you’re using equipment that comes with its own software plug-in for use with Premiere Pro, it may provide device
control options different from those described here, and in different locations. (For information, see the
documentation for the device.)
Before you can export a sequence to an HDV device, you must first transcode it to HDV format. Premiere Pro does this
transcoding automatically just before exporting the sequence to an HDV device.
Note: You can export to tape on an HDV device in Windows only, and only with device control over FireWire.
1 Make sure that your video recording device is on and that the correct tape is in the device. If necessary, locate and
note the timecode for the location at which you want to begin recording. (This requires a tape recorded with
timecode. See
Stripe tape or replace timecode.)
2 Activate the sequence you want to export, and position the work area bar over the section of the sequence you want
to export.
To place the work area bar over the whole section of the sequence that is visible in the Timeline panel double-click
in the space just under the time ruler. To first view the whole sequence, press the backslash (\) key.
3 Choose File > Export > Export To Tape.
4 To let Premiere Pro control your deck, select Activate Recording Device and do any of the following:
• To specify a particular frame on the tape to start recording, select Assemble At Timecode and type the In point.
If you don’t select this option, recording begins at the current tape location.
• To synchronize a device’s timecode with the recording start time, select Delay Movie Start and type the numbers
of frames that you want to delay the movie. Some devices need a delay between the time they receive the record
command and the time the movie starts playing from the computer.
• To have Premiere Pro roll the tape before the specified start time so that the deck can attain a constant speed,
select Preroll and type the number of frames you want the tape to play before recording begins. For many decks,
150 frames is sufficient.
5 In the Options section, select any of the following options:
Abort After Dropped Frames Ends export automatically if a specified number of frames is not exported successfully.
Specify the number in the box.
Report Dropped Frames Generates a text report alerting you to dropped frames.
Render Audio Before Export Prevents sequences containing complex audio from causing dropped frames during
export.
6 Click Record, or, for HDV devices click Render And Record.
If exporting to an HDV device, a rendering dialog box will open with a progress bar showing the progress of the
transcode to HDV. Typically, export to tape will begin when transcoding is about 50% done.
7 If you don’t need to perform any more recordings after the Recording Successful message appears in the Status
option, click Cancel to close the Export To Tape dialog box.
… 510 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adobe Premiere Pro CC - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adobe Premiere Pro CC - 2015 in the language / languages: English as an attachment in your email.

The manual is 29,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Adobe Premiere Pro CC - 2015

Adobe Premiere Pro CC - 2015 User Manual - German - 647 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info