618535

Adobe InCopy CC - 2014 Manual

253
Zoom out
Zoom in
Previous page
1/341
Next page
248
Typography
Last updated 6/15/2014
Before tsume (left), and after tsume (right)
1 Select the text to which you want to apply tsume.
2 Input the percentage in Tsume in the Character panel or the Control panel.
You can also check which tsume or tracking was applied for each character by highlighting the affected text.
Using grid tracking to adjust character spacing
One way in which you can compress aki between characters is to specify the line spacing for the frame grid itself and
adjusting tracking for placed text. This is a form of character compression that uses a feature called Adjust Tracking
With CJK Grid in the Character panel menu or the Control panel (also called grid tracking).
Some characters in CJK fonts are smaller than the embox, resulting in a large aki between characters when they are
placed on the frame grid. Setting tsume in this way for the grid itself is convenient because it allows mojikumi where
characters are properly aligned in the grid. This setting can also be saved as a grid format.
The Character Aki default in the Frame Grid Settings dialog box is set to “0”. In automated typography, this tracking is
known as “Beta”. Setting this to a negative value for mojikumi causes the right grid to overlap the left grid in accordance
with the set value. Characters input to the grid will be aligned on the basis of the center of the each grid, so the spacing
for each character will be compressed. In addition, depending on the mojikumi settings, character forms adjusted to
less than the maximum width will change on the basis of the value proportion of Line Spacing Tsume. For instance,
when mojikumi is set to half spacing for yakumono such as parentheses, by setting the Character Aki in the grid to -1H,
yakumono will be compressed to half of -1H, thus -0.5H. However, because character spacings based on tracking in this
grid are not applied to Roman text, character spacing for Roman text will not be compressed in line with tracking. In
addition, because this tracking value is applied to the grid itself, it is handled as an absolute value. For this reason, even
if the text font size changes, the tracking value does not.
This feature is enabled by default. To disable this feature, select Adjust Tracking With CJK Grid from the Character
panel menu or Control panel, and deselect the box to the left of the item name.
Adjust tracking by using Grid Jidori
You can justify text for specified grid characters by setting grid jidori. For example, if you select 3 characters entered
and set jidori to 5, the 3 characters will be spread evenly across the grid for 5 character spaces.
1 Select a range of characters.
2 In Grid Jidori in the Character panel or Control panel, enter a value in the text box or select one from the pop-up
menu.
Note: Use the Grid Jidori feature in the frame grid. It may not function properly in a text frame.
… 253 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adobe InCopy CC - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adobe InCopy CC - 2014 in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Adobe InCopy CC - 2014

Adobe InCopy CC - 2014 User Manual - German - 315 pages

Adobe InCopy CC - 2014 User Manual - Dutch - 306 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info