734435
6
Zoom out
Zoom in
Previous page
1/56
Next page
23. If disposing of the heater please follow rules of oil disposal.
1. Diode indicating operation of the device
18. Do not cover the heater with curtains, a towel or hang washing on it – this can damage
the heater or cause a fire.
3. Power level control knob 0/1/2/3
6. Ribs
19. When using the heater, completely unwind its cable and make sure that the cable is not
touching the hot surface of the heater.
20. Do not use the heater near basins, showers, sinks, pools or other places where it can
get wet.
ASSEMBLY (Fig. 2)
1. Turn the heater upside down.
4. Cable storage
2. Place the wheel bases between the last ribs.
16. The power cable should not be placed above the heater, and also should not touch or
lie close to hot surfaces. Do not place the heater under an electrical outlet.
sink filled with water.
4. Block the clamp by screwing on the butterfly nut.
WARNING: To avoid overheating do not cover the heater.
3. Use the U-shaped clamp to hook the bases.
5. Place the heater on the wheels.
17. The surface of the heater can heat up to high temperatures of over 60 degrees C. Take
care when near the heater.
DESCRIPTION OF THE DEVICE (Fig. 1)
2. Thermostat control knob
15. The heater should be placed on a level, heat-resistant surface, away (at least one
meter) from flammable materials (lace curtains, curtains, wallpaper, furniture etc.).
21. The device must be completely cool prior to storage. Keep the original packaging to
store the heater in during non-heating seasons.
CAUTION: After turning the heater, wait at least one hour before connecting it to a power outlet.
5. Wheels
USING THE DEVICE
22. The heater is filled with a set amount of special oil. Repairs requiring opening of the oil
container must be carried out only by the manufacturer or authorized representative, who
should be contacted if oil leaks from the heater.
CLEANING THE DEVICE
1. Prior to cleaning always remove the plug from the electrical outlet.
4. Never use wax, shining agents or chemical agents to clean the heater. They may react with the device and cause discoloration or
even damage.
1. Place the oil heater a minimum of 100 cm from walls, furniture, curtains, plants etc.
3. Turn the heater on by turning the on-switch control knob (3) to position 1 (low heating power) or 2,3 (high heating power). Set a
comfortable oil heater temperature by turning the thermostat control knob.
CAUTION: During first use of the heater a small amount of smoke may appear. This is normal.
3. Wipe the heater with a damp cloth, then wipe dry.
2. Make sure that the on-switch control knob (3) and thermostat control knob (2) are set to '0'. Connect the oil heater to mains power.
2. Prior to cleaning allow the heater to cool. Make sure that it is cool.
4. After you finish using the heater, turn it off by turning the on-switch control knob and thermostat control knob to '0' and disconnect the
power cable from mains power.
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD7808 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD7808 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info