800094
4
Zoom out
Zoom in
Previous page
1/76
Next page
4
10. Do not use the device on clothes you are wearing, always take them off. This may
cause personal injury or damage to the lint remover.
11. The device has a protective lock. It will not function unless the blade cover is refitted.
12. Take care not to use the device on buttons, zips, appliqués, patches, stickers, labels,
rips, seams, and seams.
13. Do not use the device on silk, wool, or linen garments. This can damage fabrics and
damage the shaver blades.
14. Do not use the device near water, e.g. in the shower, bathtub, or over a wash basin
with water.
15. Do not allow the device to get wet. Before using the appliance again, it must be
checked by a qualified electrician.
9. Do not press the device into the fabric as this may damage the fabric.
16. Do not handle the device with wet hands.
11. Cleaning brush 12. USB charging cable
5. USB type C charging port 6. Blade Cover
1. Battery level indicator 2. Battery charging indicator
9. Bin for knots and pilling 10. Housing
17. The device should be turned off each time it is put away.
Device description:
3. Working speed indicator 4. Button for changing the working speed / ON OFF power
7. Blades 8. Rotary shaft
BATTERY CHARGING:
When the battery is fully charged, the battery level indicator will show 100%. The time to fully charge the battery is 2-3 hours. When fully
charged, the run time is approximately 120 minutes, depending on the selected speed.
1. Place the garment (fabric) on a flat surface, and smooth out the wrinkles.
When connected to power, the battery charge indicator (2) will illuminate and the battery charge indicator (1) will display the current
battery charge.
USING THE DEVICE
2. Switch on the device by pressing the button (4), the device has three speeds. To increase the speed, press button (4) again. Available
speeds: 6500, 7500, 8500 rpm
4. Stubborn knots can be removed by moving the device across and then along ("checkered") on one small piece of clothing.
5. Thin garments can be defrosted by placing them on flat, rigid cardboard.
3. Move the device back and forth across the material.
6. For fabrics with a pattern, move the device in the direction of the pattern.
CLEANING
The device should not be used while charging.
1. Switch off the device by pressing the button (4).
To start charging, plug the charging cable (12) into the charging socket (5) and then connect it to the power supply.
6. After cleaning, reassemble all the disassembled parts.
5. Empty the knots and lint container (9).
The device has a protective lock. It will not function unless the blade cover (6) is refitted.
Power: 5W
Power supply: USB 5V/1A
3. Remove the blades (7) by pulling them upwards (Caution! The blades are very sharp!).
TECHNICAL DATA:
2. Unscrew the blade protection cover (6) counter clockwise.
4. Clean the blade cover (6), the blades (7), and the rotating shaft (8) with the included brush (11).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 9617 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 9617 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info