534068

Adler AD 8126 Manual

14
Zoom out
Zoom in
Previous page
1/24
Next page
ENGLISH
14
DESCRIPTION OF THE DEVICE (fig 4)
4A. LCD display
4B. Glass scale platform
BATTERY REPLACEMENT
Before use remove isolation layer from the battery contact (fig 1). Pay attention to polarisation.
1. Open battery cover on the bottom of the scale. Remove the used battery.
2. Insert new battery sliding one side into the contact, and pressing down the other side. Close the cover.
OPERATION
STEP 1. Place the scale on hard and flat surface (avoid carpets and soft surfaces).
[STEP 2. Lift slightly front of the scale, and then lower it (fig 5). The device will switch on automatically.]
STEP 2. Press the scale, the device will switch on automatically. Wait until the display shows “0”.
STEP 3. Softly step on the scale. Stand evenly on the scale, and do not move until your weight indication on the
display will not change and will be locked.
AUTOMATIC SWITCH OFF
When you step off the scale the device will switch off automatically. The scale switches off automatically when
the display shows “0.0” or the same weight indication for 8 seconds.
CHANGE OF MASS UNIT (fig 2)
You can change the units, in which the weight is shown, using the switch under the scale, near the battery
compartment or under the battery compartment cover. Available units: kilograms (kg), pounds (lb) and stone
(st).
SCALE MESSAGES (fig 3)
a – scale overload
b – battery low, replace battery.
CLEANING AND MAINTENANCE
1. Clean the scales using moist cloth. Wipe the scale dry.
DO NOT use chemical/corrosive cleaning agents.
2. Store the scale in cool and dry place.
3. The scale should always be in horizontal position.
Device is made in class II of isulation.
Device is compliant with EU directives:
- Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
DEUTSCH
DETAILLIERTE SICHERHEITSHINWEISE
1. Stellen Sie das Gerät immer auf einen stabilen und flachen Untergrund.
2. Vermeiden Sie es, das Gerät in der Nähe von starken elektromagnetischen Feldern zu halten.
3. Achten Sie bitte darauf, dass der Untergrund, auf dem das Gerät steht, nicht feucht oder rutschend ist.
4. Achten Sie bitte darauf, dass keine schweren Gegenstände auf Display oder den Glasteil der Waage fallen.
5. Wird die Waage für längere Zeit nicht benutzt, sollte die Batterie aus dem Batteriefach entnommen werden.
6. Lassen Sie die Waage nicht schlagen, schütteln oder fallen.
7. Nach dem Treten auf die Waage machen Sie keine Bewegungen während der Messung.
8. Nicht für kommerzielle und medizinische Zwecke verwenden.
BESCHREIBUNG DES GERÄTES (Abb. 4)
4A. LCD-Anzeige
4B. Waageplattform aus Glas
BATTERIEWECHSEL
Vor Gebrauch der Batterie entfernen Sie die Isolationsschicht aus dem Batteriestoß (Abb.1). Achten Sie auf
korrekte Polarität
1. Öffnen Sie das Batteriefach auf der Unterseite der Waage. Entfernen Sie die verbrauchte Batterie.
2. Legen Sie eine neue Batterie, indem Sie eine Seite der Batterie in den Stoß hineinschieben und die andere –
zudrücken. Machen Sie die Batteriefachabdeckung zu.
BENUTZUNG
SCHRITT 1. Stellen Sie die Waage auf einem harten und flachen Untergrund (Vermeiden Sie Teppiche und
weiche Oberflächen).
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 8126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 8126 in the language / languages: English, German, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info