800068
4
Zoom out
Zoom in
Previous page
1/72
Next page
4
17. WARNING: Be careful that the products stored inside do not cover the vent.
18. Use the refrigerator in an upright position only.
19. Do not expose the refrigerator to direct sunlight, rain, snow, excessive moisture, etc..
20. Exercise particular caution when transporting the switched-on device in a car. Protect
against falling while driving.
21. WARNING: Keep space around the ventilation openings. Covering them will reduce the
cooling capacity and may damage the refrigerator.
23. Only ready-made (wrapped) articles may be stored in the refrigerator.
24. Prevent the appliance from being upside down. Don't drop or shock it.
25. Store food in original packaging or containers intended for this purpose.
DEVICE DESCRIPTION:
1A. Control panel 1B. Fan 1C. Car power cable
1D. Power supply cable for the home electrical installation
2B. Voltage switch – DC (12V ) / switching off (OFF) / AC (220-240V~)
2C. Car power socket 12V
22. Never connect the power cord to both the cigarette lighter and the electricity supply to
the refrigerator at the same time.
2A. Mode switch - heating (HOT) / switching off (OFF) / cooling (COLD)
current not exceeding 30 mA. A specialist electrician should be consulted in this regard.
15. Only original assembly parts and power cables supplied by the manufacturer in the set
with the device should be used.
16.Do not overload the refrigerator. The cover must close freely.
c) Insert the other end of the cable with the plug (1D) into the electric socket.
2. Device operation:
USING THE APPLIANCE
With 12V DC power supply:
d) Set the mode switch (2A) to: “HOT" when you want to heat the chamber or "COLD" to cool the chamber.
AC: Heating mode 38W / Cooling mode 42W
b) Set the voltage switch (2B) to AC.
WARNING: Don't switch the mode switch (2A) abruptly. Switch the function after 30 minutes of being on position: OFF.
2D. 220-240V~ power socket
The power consumption on each setting is as below:
With AC220-240V power supply:
a) Plug in the connector to the AC slot (2D).
Cleaning and Maintenance
NOTE: DO NOT PUT ANY FOREIGN OBJECTS INTO THE FAN TO CLEAN IT.
a) Insert the other end of the cable with the plug (1C) into the cigarette lighter socket.
c) Plug in the connector to the DC slot (2C).
d) Set the mode switch (2A) to: “HOT" when you want to heat the chamber or "COLD" to cool the chamber.
The power consumption on each setting is as below:
3. After finishing operation, set the mode switch (2A) and voltage switch (2B) to "OFF" and disconnect the wires.
1. Before cleaning make sure that the device is not connected to the power source.
b) Set the voltage switch (2B) to DC.
3A. Mini fridge chamber with aluminum cavity 3B. Shelf 3C. Mini basket 3D. Handle
2. The cleaning process is restricted to using a damp cloth with a little of washing up liquid on the inside and outside of the devices body.
DC: Heating mode 32W / Cooling mode 36W
1. Ensure that the power switch (2A) on the control panel (1A) of the refrigerator is in the OFF position.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 8084 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 8084 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 9.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info