800054

Adler AD 7966 Manual

6
Zoom out
Zoom in
Previous page
1/120
Next page
6
fall to the floor and cause moisture.
37. Do not lift the water tank by the water mist outlet.
38. It is prohibited to insert metal chips, wire, needles and other foreign objects into the
product or into the housing gaps, otherwise it may cause electric shock or malfunction.
39. Be aware that high humidity levels may encourage the growth of biological organisms
and fungi in the environment.
40. Too much humidity in the room can lead to moisture accumulation causing the damage
to walls, furniture, wallpaper and electric other appliances as TV. Do not direct the mist
outlet close to such objects.
41. Do not permit the area around the humidifier to become damp or wet. If dampness
occurs, turn down the mist production. If the mist capacity cannot be turned down, use the
humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains,
drapes, or tablecloths, to become damp.
42. Do not cover the device. Do not place any objects on the top of the device.
43. Do not use the device in association with a programmer, timer or other device that
automatically switches the humidifier on.
The device is designed to work in rooms with a temperature of 5-40°C and a relative humidity below 80%.
Device description: Humidifier AD7966
1. Cover 2. Mist outlet
3. Water tank 4,6 liters 4. Control panel
4A. Power button 4B. Hygrostat button
4C. Timer button 4D. Sleep button
4F. Humidify button 4G. LCD display
5. Aromatherapy oil box 6. Bottom water basin
7. Water level control module 8. Water shortage sensor
9. Atomizer 10. Descaling filter
11. Water shortage indicator
OPERATION
1.Stand up the device on stable, flat surface. Remove the water tank (3) from the water basin (6) to take away the protection foam
located under the water level control module (7).
2.Make sure the descaling filter (10) (grey ring attached in set) is lay on the atomizer (9).
3.Fill the water according to instruction in chapter: Filling the water.
4.Plug in the device.
5.Press the POWER button (4A), the LCD screen (4G) lights up and the device starts to work with high mist. Press again to turn off the
device.
6.Press the HYGROSTAT button (4B) to select the desired level of humidity. The default humidity is 40%, it can be increased by 5% until
90% by repeated pressing the HYGROSTAT button (4B), the device will stop working when the room humidity reaches desired humidity
value.
7.Press the TIMER button (4C) repeatedly to adjust the working time from 1 hour to 12 hours in one-hour increments. The device will
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 7966 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7966 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 7.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info