800053

Adler AD 7939 Manual

4
Zoom out
Zoom in
Previous page
1/56
Next page
4
2. Not suitable use in garages, stables and alike where the dust density in the air can be high.
3. Do not use the device in the inflammable or explosive locales and alike.
Assembling
1. Install the device at a height of at least 2 meters on the wall so that children cannot reach it.
2. Mark the holes in the plastic hanger (10) on the wall with a pencil. Drill holes in the wall, install the supplied wall plugs (11). Screw the
wall plastic hanger (10) with the included screws (12).
3. Hang the device by matching the hanging plate (7) with the wall plastic hanger (10).
4. It is best to choose location close to the doors or windows but without direct wind power flows, or other place you had observed the
insects are flying often before. Location is important for efficiency.
Device Description: Mosquito killing device AD7939 – look at page 2
1.Housig 2.Front net 3. Two UV fluorescent lamps
4.High voltage metal grid 5. Died insects collection tray 6. Power cord
7. Hanging plate 8. Lamp casing 9. Rope ON/OFF switch
10. Wall plastic hanger 11. Wall plugs 12. Screws
PRINCIPLE OF OPERATION
The device attracts insects with UV light with a UV wavelength of 365nm, insects fly inside the device, then touch the high voltage metal
grid (4) causing insects to die. Plug device into an electric socket before switch on the light or switch off all the strong lights for 10-20
minutes suddenly. Use the device away from the places with wind power, strong UV ray and other fluorescent lamps irradiation and also
far away from the children could reach. Do not put your hands into the device or carry it while it is running.
USE
1. Make sure that your local voltage and frequency is suitable for the device. Ensure the earth-connection works properly to prevent
damage or danger.
2. Insert the plug into the socket. Turn on the device by pulling the rope switch (9), the UV light lamps (3) will illuminate on and the device
works.
3. Pull the rope switch (9) again, the UV light lamps will switch off.
4. Unplug the socket.
PROCEDURE TO CHANGE THE LAMP
1.Turn off and unplug the device from socket. Take out it from the plastic hanger (10).
2.Unscrew the lamp casing (8) in the rear of the device with a screw driver. Take out the lamp casing (8) and rotate the UV lamp (3) to
take it out from the lamp holder.
3. Insert the new lamp and rotate it to fix it on place. Screw the lamp casing (8) again.
4. Place the device on the wall plastic hanger (10) and switch on it to continue operation.
CLEANING AND MAINTENANCE
1. Before cleaning or maintenance, unplug the device and allow it to cool down.
2. Do not use aggressive chemical cleaning agents for cleaning. Wipe the housing with a damp cloth and mild detergent.
3. Every week clean the tray (5) from died insects bodies by slide out the tray. Empty the collecting tray and slide in again.
4. Clean the dead insects from front net (2) and the high voltage metal grid (4) by soft brush, when the device is unplugged and leave for
10 minutes. The dead insects won't affect the function, but it's better to clean the grid while a lot of insect on it.
5. Make sure the device is dry before switching it on again.
TECHNICAL DATA
Light source lifetime minimum 5.000 hours,
Light source type: UV fluorescent lamp wavelength of 365nm,
Lamp type: T5, Power: 4W, Size: Ø16mm, length 135.9mm
Power supply of the device: 220-240V ~50/60Hz
Power of the device: 2x4W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
DEUTSCH
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2.Das Gerät ist nur für den Hausgebrauch verwendet. Verwenden Sie es nicht für andere
Zwecke als den bestimmungsgemäßen Gebrauch.
3.Das Gerät ausschließlich an die Steckdose 220-240 V - 50/60Hz anschließen. Es darf
nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden. Wegen
Vorsichtsmaßnahmen, sollten keine weiteren Geräte an den gleichen Stromkreis
angeschlossen werden.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 7939 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7939 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info