725554
6
Zoom out
Zoom in
Previous page
1/124
Next page
CONTROL PANEL operation – picture D
C. Timer / Temperature down button D. Timer / Temperature up button
G. Timer button
Press button “A” to turn on and turn off the machine, the buzzer will play signal once. The control lamp “O” will switch on the control panel.
E. Sleep model F. Fan speed button
Remote controller – Picture E
A. Power button B. Mode button
- Power OFF delay setting:
Delay start function:
- Power ON delay setting:
Switch off the device and then press the button “G”, next press up button “D” or down button “C” to select the required time value. The
maximum power on delay time is 24 hours. The device will be switched on after the delay time has elapsed.
Press button “G” to select operation period, when the LCD screen flashes, press up button “D” or down button “C” to select the required
time range. Time setting range 1-24 hour and can be adjusted up or down by one hour.
- In the cooling mode, press both buttons “F” and “D” to turn on the sleep mode, then the unit will work on Energy - Saving and quiet type.
The sleep model control lamp “N” will switch on the control panel.
- In cooling and fan mode, press the button “F” to select high or low wind speed operation. In too cold conditions, it may not run according to the
set wind speed.
- In dehumidifying mode, pressing the button “F” is invalid, and the fan will forcibly choose low wind speed operation.
Press button “E” to select the Sleep Mode:
Press button “B” to switch mode, between cooling mode fan mode dehumidifying mode.
Press button “D/C” Up / Down to change the setting temperature or setting time, operate as follows:
- While setting temperature, press button up or down button to select the required temperature (not available in fan or dehumidifying
mode).
Press button „F” to select the Fan speed:
- While setting time, press up button or down button to select the required time.
Button "A" - the appliance will be started when it is energized or will be stopped when it is in operation, if you press this button.
Button "F" - press it to select fan speed in sequence: low / high wind speed.
The remote controller transmits signals to the system.
Button "B" - press it to select operation mode: cool mode dry mode fan mode.
Button "C" / "D" - press to adjust the room temperature and the timer.
PROTECTION DEVICES
1. Frost Protection Function:
To increase the service life of the compressor, it has a 3-minute delay booting protection function after the compressor is turned off.
Button "E" - press to set or cancel sleep mode.
Button "G" - press to set the operation time from 1 to 24 hours.
Switch on the device and then press the button “G” , next press up button “D” or down button “C” to select the required time value. The
maximum power off delay time is 24 hours. The device will be switched off after the delay time has elapsed.
2. Overflow Protection Function “M”:
When water in the water pan exceeds the warning level, the machine will automatically sound an alarm, and the "FULL" indicator light “M”
will flash. At this time, drain the water according to drainage instructions. After the water is emptied, the machine will automatically return to
the original state.
Flashing will stop soon and LED screen come back to show required temperature.
3. Protection Function of the Compressor
REMOTE CONTROLLER operation – picture E
In cooling, dehumidifying or economic power saving mode, if the temperature of the exhaust pipe is too low, the machine will automatically
enter protection status; if the temperature of the exhaust pipe rises to a certain temperature, it can automatically revert to normal operation.
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 7909 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7909 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info