800030
8
Zoom out
Zoom in
Previous page
1/104
Next page
8
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance
should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this
appliance in the common waste bin.
DEUTSCH
remove the battery, simply squeeze the small tab and pull. Insert 1 x CR2025 (3V) lithium battery into the small crevice as illustrated
(picture 3).
IMPORTANT: The + symbol on the battery inserted should be facing upwards. Firmly close the battery compartment to begin using the
Remote Control (4).
TIMER FUNCTION:
The timer allows you to set the length of time from 1-12 hours. Set time is counted down to switch off the device automatically. To use the
timer, press the timer button (D). Each one pressing of the button increases the time set by 1 hour. The amount of time set will be displayed
on the digital display (F), and will displayed in 1 hour distances. If the timer has been set for 12 hours (MAX amount of time) pressing the
button once more will reset the Timer Function.
OSCILLATION FUNCTION:
Press the oscillation button (E) to turn on the oscillation function. The device starts to swing left and right side in range of 50 degree to
provide wider air stream in room. Press the oscillation button (E) again to turn off the oscillation function.
TEMPERATURE SETTING:
By pressing buttons (C) set up desired temperature in room.
1. The temperature range is available from 15 to 40 degrees of Celsius. Press the button (C) again and again until you reach the
temperature level you want in the room. For first use time the default temperature is set on 25 degrees of Celsius. One the button (C)
pressing causes one degree change.
2. The device automatically set up the heating power:
- it is working on high heating power 2000W if the set temperature is 4 degree higher than the present temperature in room.
- it is working on low heating power 1400W if the set temperature is 2-3 degree higher than the present temperature in room.
- it is working on fan mode if the set temperature is +/- 1 degree different than the present temperature in room.
WARNING: During use, do not touch or cover the air inlet and air outlet.
BUTTON LOCK FUNCTION: 3 seconds continuous pressing together timer button (D) + temperature button (C), it protects against not
intentional setting change.
Buttons unlocking: 3 seconds continuous pressing together timer button (D) + temperature button (C) again, the key lock function will be
off, the device is ready for use again.
DISPLAY BLANKING FUNCTION: 3 seconds continuous pressing the oscillation button (E) causes blanking of the control panel (1).
Pressing any key will wake up the display again.
SAFERTY PROTECTION
1. OVERHEAT PROTECTION: This device is fitted with a safety overheat protection device. If overheating occurs, ensure the power switch
(5) is off and turn off the power supply. Unplug the device and let it cool down for 30 minutes. If something is obstructing air flow grids (2
and 3), ensure the object is removed. After 30 minutes has passed, turn the device on again as described above.
2. TIP-OVER SWITCH: The device will only work on a firm stable surface. If the device is not 100% stable, located at not vertical position
or it falled down, the device will switch off until placed in the correct position.
CLEANING AND MAINTENANCE
1. Make sure the device is not hot.
2. Before cleaning the device remove the plug from the electrical socket.
3. Keep the air inlet (2) and outlet (3) openings clean. Do not allow dust to collect on the openings.
4. Clean the housing using only dry or moist cloth.
5. Do not immerse the device in water!
TECHNICAL DATA
Voltage: 220-240V ~50-60 Hz
Power: 2000W
Battery: 1 x CR2025 (3V) lithium battery not included
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2.Das Gerät ist nur für den Hausgebrauch verwendet. Verwenden Sie es nicht für andere
Zwecke als den bestimmungsgemäßen Gebrauch.
3.Das Gerät ausschließlich an die Steckdose 220-240V ~50-60Hz anschließen. Es darf
nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden. Wegen
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 7738 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7738 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info