800006

Adler AD 7323 Manual

4
Zoom out
Zoom in
Previous page
1/60
Next page
4
injury or damage to the device
DETAILED SAFETY INSTRUCTIONS
1.Use only original assembly parts, which were supplied with the fan set.
2.The device may be turned on only after it is fully assembled. A partially assembled and started-up device does not guarantee safe use
and proper operation.
CAUTION: DO NOT TURN THE FAN ON WITHOUT ATTACHING THE FRONT AND REAR GUARDS.
3.Place the fan away from curtains, sheer curtains and other items, which can be sucked in by the running fan.
4.Do not insert any objects into the fan grid. This could hurt your body or damage the device.
PRODUCT DEACRIOTION STAND FAN AD7323
1.Front grid 2.Propeller 3.Rear grid 4.Motor unit
5.Speed control buttons 6.Pipe (6A inside, 6B outside) 7.Base cover 8.Screw
9.Round base 10.Motor shaft 11.Oscillation button
ASSEMBLING
1.Draw the adjustable pipe (6A) out of the metal pipe (6B) then fasten the nut by clockwise.
2.Assemble the pipe (6A+6B) to the base (9) with the screws.
3.Slide the base cover (7)down onto the base (9).
4.Assemble the motor unit (4) on the top of the adjustable pipe (6A) then lock it with the screw.
5.Remove the nuts from the motor shaft (10).
6.Assemble the rear grid (3) onto the motor unit (4). Rear grid (3) should fit into pins on the fan motor housing (4).
7.Thread the grid nut onto motor housing (4) to lock the rear grid (3) in place.
8.Place the propeller (2) onto motor shaft (10). Notice the pin on motor shaft should fit into slots of fan propeller.
9.Thread the propeller’s cap onto threaded end of motor shaft (10).
10.Use the screws and nuts to assembly the round logo plate with the front grid (1).
11.Attach front grid (1) to rear grid (3). Then push all the safety clips into their places.
12.Assemby the safety screw and nut together to secure connection of both grids.
OPERATION
1.Please check the voltage information and make sure it matches the one in your country.
2.Place the device on flat, stable surface.
3.Use the speed control buttons (5) to operate the fan. Press proper switch to turn on the required speed. The fan has got 4 speed
positions:
0 = off; 1 = low speed; 2 = medium speed; 3 = fast speed.
4.Oscillation control: To make the fan oscillate in the left and right direction, press the oscillation button (11) down, it is located at the top
of motor housing (4). To stop oscillation, pull up the oscillation button (11).
5.Tilt control: Adjust the fan head (1+2+3) to the desired angle by pushing the motor unit (4) a little up or down direction.
CLEANING AND MAINTENANCE
CAUTION: Do not allow the fan's motor unit (4) or any buttons to get wet.
1. Before cleaning remove the plug from the electrical socket.
2. To clean dust from the fan propeller (2), remove the front grid (1). Remove the fan propeller (2) from the motor shaft (10), wipe with a
damp cloth, then wipe dry.
3. In order to clean the motor unit (4) gently wipe it with a damp cloth, without detergents. Wipe it dry.
4. Store the fan in a dry place.
TECHNICAL INFORMATION:
Diameter 40cm / 16” Max Power: 90W Power: 40W Power supply 220-240V ~ 50Hz
Noise level 53,6 Db
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
DEUTSCH
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2.Das Gerät ist nur für den Hausgebrauch verwendet. Verwenden Sie es nicht für andere
Zwecke als den bestimmungsgemäßen Gebrauch.
3.Das Gerät ausschließlich an die Steckdose 220-240 V ~ 50/60 Hz anschließen. Es darf
nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden. Wegen
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 7323 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7323 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info