732293
5
Zoom out
Zoom in
Previous page
1/54
Next page
injury or damage to the device.
Assembly:
Unscrew the plastic screw (7) from the spindle - picture 1A.
Thread the power cord through the groove in the back base (6) - picture 1B.
Connect and screw the front base (5) with the rear base (6) - picture 1C.
Place the base on the spindle and fasten with screw (7) - picture 1D.
Description of the device – picture 3.
1. control panel
2. lamp
3. housing
4. pilot
5. back base
6. front base
7. plastic screw
8. power cord
Using the device – picture 2.
Press the TIMER button (1) to set the time from 0.5 hours to 7.5 hours.
Press the OSC button (2) to make the device rotate left and right approximately 90 degrees or to stand still.
Press the OFF button (3) to stop the device.
Press the ON / SPEED button (4) to select the airflow rate:
LOW - slow
MID - medium
HIGH - fast
Press the MODE button (5) to select the operating mode:
NATURAL = the device will cyclically simulate natural wind, sometimes strong and sometimes slow.
SLEEP = 3 modes, the wind will be slower and slower:
- HIGH speed will change to MID after half an hour, and after another half hour it will change to LOW.
- MID speed will change to LOW after half an hour.
- LOW speed will switch to the operating time set by the timer after half an hour.
NORMAL = FAST or MEDIUM or SLOW
CLEANING AND MAINTENANCE
CAUTION: Do not allow the fan's motor part or any buttons to get wet.
1. Before cleaning remove the plug from the electrical socket.
2. To clean the housing gently wipe it with a damp cloth, without detergents. Wipe dry.
3. Store the fan in a dry place.
Technical Data:
Voltage 220-240V ~50/60 Hz
Power: 40W Maximum Power: 80W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
DEUTSCH
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2.Das Gerät ist nur für den Hausgebrauch verwendet. Verwenden Sie es nicht für andere
Zwecke als den bestimmungsgemäßen Gebrauch.
3.Das Gerät ausschließlich an die Steckdose 220-240 V ~ 50/60 Hz anschließen. Es darf
nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden. Wegen
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 7319 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7319 in the language / languages: All languages as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info