732297
4
Zoom out
Zoom in
Previous page
1/56
Next page
AD7317 / 15 cm / 15W / 30W / 220-240V ~ 50 / 60Hz
1. Press the '0' button on the control panel (9), then plug the power cord into an electrical socket.
AD7302 / 23 cm / 22W / 45W / 220-240V ~ 50 / 60Hz
AD7303 / 30 cm / 35W / 70W / 220-240V ~ 50 / 60Hz
- attach the exterior barrel to the control panel housing (10) using the mounting screw (11)
3. Place the fan blade (3) on rotor axis. Fasten with the blade nut (2). Check to make sure that the blade rotates without
resistance.
1. Before cleaning remove the plug from the electrical socket.
2. To clean dust from the fan blades, remove the front guard. Remove the fan blade from the rotor axis, wipe with a damp cloth,
then wipe dry.
Item number / Diameter / Power / Power max: Voltage
For model AD7317:
2. Attach the rear guard (5) to the motor unit (6) using the nut (4).
4. Attach the front guard (1) to the rear guard (5) using the hinge clamps on the outside of the front guard.
AD7301 / 15 cm / 15W / 30W / 220-240V ~ 50 / 60Hz
For model: 7305 model:
For all models:
2. Turn the fan on by pressing button '1' or '2' (AD7301, AD7302, AD7317)) or '1', '2' or '3' (AD7303, AD7304, AD7305). After a
few seconds the fan blades will begin to rotate at the maximum speed of the selected gear
4. You can adjust the fan's vertical angle by tilting the fan unit.
Technical Data:
3. To turn on the oscillating motion of the fan unit (horizontal) press the motor head lock button (7). Pulling the button upwards
will turn the oscillation off (horizontal).
CLEANING AND MAINTENANCE
- assemble the fan base (15, 16) and attach the exterior barrel (14).
3. To clean the motor unit gently wipe it with a damp cloth, without detergents. Wipe dry.
4. Store the fan in a dry place.
AD7304 / 40 cm / 45W / 90W / 220-240V ~ 50 / 60Hz
AD7305 / 40 cm / 45W / 90W / 220-240V ~ 50 / 60Hz
USING THE DEVICE
CAUTION: Do not allow the fan's motor part or any buttons to get wet.
- mount the base (16) or the clip (17) with the fastening screw (11) and the nut (18) - according to figure 3.
1 Front guard 2.Blade nut 3.Blade
4 .Rear guard nut 5.Rear guard 6.Motor unit
10. Control panel housing 11.Mounting screw 12.Interior barrel
13. Height adjustment 14.Exterior barrel 15.Base guard
16. Base 17.Clip 18. Fastening nut
FAN ASSEMBLY
1.Make sure that the power cord is disconnected from the electrical socket.
7. Motor head lock 8.Power cord 9.Control panel
injury or damage to the device.
DESCRIPTION OF THE DEVICE (IMAGE 1 - AD7301, AD7302, AD7303, AD7304, IMAGE 2 – AD7305, IMAGE 3 – AD7317)
4
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
DEUTSCH
1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
3.Das Gerät ausschließlich an die Steckdose 220-240 V ~ 50/60 Hz anschließen. Es darf
nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden. Wegen
2.Das Gerät ist nur für den Hausgebrauch verwendet. Verwenden Sie es nicht für andere
Zwecke als den bestimmungsgemäßen Gebrauch.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Adler AD 7317 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Adler AD 7317 in the language / languages: All languages as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info